Ne mettez pas l’ordinateur hors tension et ne le déconnectez pas de sa source d’alimentation pendant la mise à jour du BIOS, cela risquerait d’endommager votre ordinateur. Au cours de la mise à jour, l’ordinateur redémarre et il se peut que vous voyiez brièvement un écran noir.
Avant de procéder à la mise à jour, lisez les instructions d’installation et les informations importantes indiquées ci-dessous.
Dell Precision 7510 and 7710 System BIOS
Redémarrage requisAUTO-INSTALLATIONCe fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
Le contenu de cette page a peut-être été traduit automatiquement. Pour faire part de vos commentaires, remplissez le formulaire au bas de la page.
Ce fichier a été automatiquement installé dans le cadre d’une mise à jour récente. Si vous rencontrez des problèmes, vous pouvez le télécharger et le réinstaller manuellement.
This package contains the Dell system BIOS update. BIOS is a firmware that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Intel security advisories INTEL-SA-00213 and INTEL-SA-00233. The security advisory is a statement when a product is impacted by a security vulnerability and a remedy is available.
Format de fichier :CPG BIOS Executable for Windows/DOS
Nom du fichier :Precision_7x10_1.18.5.exe
Taille du fichier :9.59 MB
Description du format
Ce format de fichier se compose d’un fichier exécutable BIOS. Le format universal (Windows/MS DOS) peut être utilisé pour une installation à partir de tous les environnements Windows ou MS DOS.
Afin de garantir l’intégrité de votre téléchargement, veuillez vérifier la valeur de la somme de contrôle.
Connectez-vous à Windows en tant qu’administrateur pour utiliser les fonctionnalités d’analyse automatique. Si vous êtes déjà connecté en tant qu’administrateur et que vous voyez ce message, redémarrez.Votre système est géré par votre administrateur IT et peut avoir des fonctionnalités limitées.
Trouver d’autres mises à jour. Utilisez SupportAssist pour trouver toutes les dernières mises à jour de pilotes disponibles pour votre appareil.
Correctifs et améliorations
- Firmware updates to address security advisory INTEL-SA-00213 (CVE-2019-0086, CVE-2019-0091, CVE-2019-0092, CVE-2019-0093, CVE-2019-0094 and CVE-2019-0096) - Firmware updates to address security advisories INTEL-SA-00233(CVE-2018-12126, CVE-2018-12127, CVE-2018-12130 and CVE-2019-11091) - Fixed the issue where the TPM setting may be unexpectedly enabled after loading the Custom User Settings in BIOS. - Fixed the issue where the Thunderbolt hard disk cannot be detected after setting Thunderbolt security level as No Security in BIOS setup menu. - Fixed the issue where the system boots to USB device directly, bypassing the password stage when an admin password is set. - Removed the Pre-Boot Intel RST Manager Optimized Defaults option.
Dell Technologies recommande vivement d’effectuer cette mise à jour importante dès que possible. La mise à jour contient des correctifs critiques et des modifications permettant d’améliorer le fonctionnement, la fiabilité et la stabilité de votre système Dell. Elle peut également inclure des correctifs de sécurité et d’autres améliorations de fonctionnalités.
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com. Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Download and Installation 1. Click Download File, to download the file. 2. Click Save to save the file to your hard drive. 3. Browse to the location where you downloaded the file and double-click the file. 4. Click Yes to open the BIOS update utility. 5. Click Update to initiate the update process. A progress bar is displayed. 6. Click Restart to restart the system once the progress bar reaches 100%. The update process initiates at the Dell logo and an update initiation message is displayed with a progress bar. After BIOS update finishes, system will auto reboot to take effect.
Updating the BIOS from the BIOS Boot Menu, independent of operating system
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com. Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Download and Installation 1. Click Download File, to download the file. 2. Copy the downloaded file to a USB flash device. It does not need to be bootable. 3. Insert the USB flash device into any USB port. 4. Power on the system. 5. At the DELL logo screen, press F12 to access the one-time boot menu. 6. Select BIOS Flash Update in the Other Options section. 7. Click the "..." button to browse the USB flash device to locate the downloaded file. 8. Select the file and click Ok. 9. Confirm the Existing System BIOS Information and the BIOS Update Information are as expected. 10. Click Begin Flash Update. 11. Reviewing the Warning message and click Yes to proceed with the update. 12. The system should restat and show a Flash Progress bar on the Dell logo screen as the BIOS update is being performed. 13. The system restarts once again when the Flash update is complete.
Vous avez besoin d’aide pour résoudre des problèmes de BIOS ?
Trouvez une solution dans le guide Dell d’utilisation et de dépannage du BIOS.