BIOSのアップデート中に、PCの電源をオフにしたり、コンセントを外したりしないでください。PCに障害が発生する可能性があります。アップデート中にPCが再起動し、一時的に黒い画面が表示されることがあります。
アップデートする前に、インストール手順と以下に記載されている重要な情報をお読みください。
Dell Inspiron 7466/7566 System BIOS
再起動が必要です 自動インストール済み このファイルは、最新の更新プログラムの一部として自動的にインストールされました。問題が発生した場合は、手動でダウンロードして再インストールすることができます。このページのコンテンツは自動翻訳されている可能性があります。フィードバックを提供するには、ページの下部にあるフォームに入力してください。
This package contains the Dell system BIOS update. BIOS is a firmware package that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Intel Security Advisories INTEL-SA-00115, INTEL-SA-00118, INTEL-SA-00125, and INTEL-SA-00131. A security advisory is a statement when a security vulnerability impacts a product, and a remedy is available for the vulnerability.
Inspiron 14 Gaming 7466のすべてのドライバーを表示するには、次へ移動します： ドライバおよびダウンロード。
推奨
使用可能な最新バージョンのドライバーをロード中...
これはこのドライバーのDell検証済み最新バージョンです
これはこのドライバーのDell検証済み最新バージョンではありません
Inspiron_7466_7566_1.3.1.exe | 6.77 MBデバイスのサービス タグを入力して、このダウンロードとデバイスとの互換性を確認してください。
これは大容量ファイルです。接続速度によっては、ダウンロードに時間がかかる場合があります。
ファイル形式:
Windows/DOS用CPG BIOS実行ファイル
ファイル名:
Inspiron_7466_7566_1.3.1.exe
ファイルサイズ:
6.77 MB
フォーマットの説明
このファイル形式は、BIOS実行ファイルで構成されています。ユニバーサル（Windows/MS DOS）形式を使用することで、あらゆるWindows環境やMS DOS環境でインストールできます。
ダウンロードの整合性を確認するには、チェックサムの値を検証してください。
MD5:
fe73f526223155c25cefb4fc1af78578
SHA1:
8b2b55b5db1f6dd93395254375e7bd49db3b1439
SHA-256:
13f33de76aaaca3b363e806933a7b0a5f0af57ca03957e2a7052e8a3c302311b
自動スキャンを使用するには、管理者としてWindowsにサインインしてください。すでに管理者としてサインインしていて、このメッセージが表示されている場合は、再起動してください。
お客様のシステムは貴社のIT管理者によって管理されおり、機能が制限されている可能性があります。
その他のアップデートを見る。SupportAssistを使用すると、お使いのデバイス向けの最新のドライバー アップデートをすべて見つけることができます。
修正と強化
Fixes:
- Updated CPU microcode to address the Intel Security Advisory INTEL-SA-00115 (CVE-2018-3639 and CVE-2018-3640).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00118(CVE-2018-3627).
- Firmware updates to address the Intel Security Advisories INTEL-SA-00125 (CVE-2018-3655) and INTEL-SA-00131 (CVE-2018-3643 CVE-2018-3644).
- Fixed the issue where the system stops responding when an incorrectly formatted password is entered at the BIOS Security Manager (BIOS pre-boot password) prompt.
Enhancements:
- Added new BIOS Password Feature Master Password Lockout.
詳細を見る
- Updated CPU microcode to address the Intel Security Advisory INTEL-SA-00115 (CVE-2018-3639 and CVE-2018-3640).
- Firmware updates to address the Intel Security Advisory INTEL-SA-00118(CVE-2018-3627).
- Firmware updates to address the Intel Security Advisories INTEL-SA-00125 (CVE-2018-3655) and INTEL-SA-00131 (CVE-2018-3643 CVE-2018-3644).
- Fixed the issue where the system stops responding when an incorrectly formatted password is entered at the BIOS Security Manager (BIOS pre-boot password) prompt.
Enhancements:
- Added new BIOS Password Feature Master Password Lockout.
バージョン
1.3.1, 1.3.1
リリース日:
21 9月 2018
ダウンロード タイプ
システムBIOS
カテゴリ
BIOS
重要度
重大デル・テクノロジーズでは、このアップデートをすぐに適用することを強くお勧めします。このアップデートには、Dell製システムの機能、信頼性、安定性を向上させる重要なバグ修正と変更が含まれています。セキュリティ修正やその他の機能拡張も含まれている場合があります。
重要な情報
BIOS updates take no more than 5 minutes to be installed on your system. You can install the updates in the background while using the system.
適応先
Dell Inspiron 7466/7566
インストール手順
Updating the BIOS from Windows
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS (Non-Windows users)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation
Note: You must provide a bootable USB drive. This executable file does not create the DOS system files.
1. Copy the downloaded file to a bootable USB drive.
2. Power on the system and then Press the F12 key.
3. Select USB Storage Device and boot to the DOS prompt.
4. Run the file by typing following command. For example:
C:\ Inspiron_7466_X.Y.Z.exe
Where C is the drive letter of the USB device where the executable file is located and Inspiron_7466_X.Y.Z.exe is the name of the downloaded file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS with UEFI boot mode enabled (Non-Windows users, Load Legacy Option Disabled)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing the F2 key.
3. Go to General > Boot Sequence > Boot > Boot List Option.
4. Change UEFI to Legacy of Boot List Option.
5. Go to Exit > Save Changes and reboot system.
6. Press F12 and then select USB Storage Device and boot to the DOS prompt.
7. Run the file by typing the file name.
8. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, the system restarts again.
9. Go to BIOS Setup by pressing the F2 key and go to General > Boot Sequence > Boot > Boot List Option.
10. Change Legacy to UEFI Boot Option.
11. Go to Exit > Save Changes and reboot the system.
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS (Non-Windows users)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation
Note: You must provide a bootable USB drive. This executable file does not create the DOS system files.
1. Copy the downloaded file to a bootable USB drive.
2. Power on the system and then Press the F12 key.
3. Select USB Storage Device and boot to the DOS prompt.
4. Run the file by typing following command. For example:
C:\ Inspiron_7466_X.Y.Z.exe
Where C is the drive letter of the USB device where the executable file is located and Inspiron_7466_X.Y.Z.exe is the name of the downloaded file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS with UEFI boot mode enabled (Non-Windows users, Load Legacy Option Disabled)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.
Installation
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing the F2 key.
3. Go to General > Boot Sequence > Boot > Boot List Option.
4. Change UEFI to Legacy of Boot List Option.
5. Go to Exit > Save Changes and reboot system.
6. Press F12 and then select USB Storage Device and boot to the DOS prompt.
7. Run the file by typing the file name.
8. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, the system restarts again.
9. Go to BIOS Setup by pressing the F2 key and go to General > Boot Sequence > Boot > Boot List Option.
10. Change Legacy to UEFI Boot Option.
11. Go to Exit > Save Changes and reboot the system.