-Fixed USB port speed decreased when wireless LAN is disabled. -Fixed unable to bypass mSATA SSD password when there is no primary SATA device installed. -Fixed NetworkStack does not start if FastBoot enabled.
Enhancements: -Added an item in setup menu for users to enable/disable BIOS downgrade. -Load BIOS setup default will not change boot mode setting. -Enhance security.
Download 1. Click "Download File", to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment 1. Browse to the location where you downloaded the file and double-click the new file. 2. Windows System will auto restart and update BIOS while system startup screen. 3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment, if Legacy Boot mode (Non-Windows users) 1. Copy the downloaded file to a bootable DOS USB key. 2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt. 3. Run the file by typing copied file name where the executable is located. 4. DOS System will auto restart and update BIOS while system startup screen. 5. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if UEFI Boot Mode (Non-Windows users) 1. Copy the downloaded file to a bootable DOS USB key. 2. Power on the system, then go to BIOS Setup by pressing F2 and go to "General > Boot Sequence > Boot List Option". 3. Change "UEFI" to "Legacy" of Boot List Option. 4. Click "Apply", "Exit" to save changes and reboot system. 5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt. 6. Run the file by typing copied file name where the executable is located. 7. After BIOS update finished, system will auto reboot . 8. Go to BIOS Setup by pressing F2 and go to "General > Boot Sequence > Boot List Option". 9. Change "Legacy" to "UEFI" Boot Option. 10. Click "Apply", "Exit" to save changes and reboot system.
-------------------------------------------------------------------------------- Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files. Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system. If you don't enable BitLocker on your system you can ignore it.