BIOSのアップデート中に、PCの電源をオフにしたり、コンセントを外したりしないでください。PCに障害が発生する可能性があります。アップデート中にPCが再起動し、一時的に黒い画面が表示されることがあります。

アップデートする前に、インストール手順と以下に記載されている重要な情報をお読みください。

Dell Latitude 14 Rugged Extreme 7414/5414/Dell Latitude 12 Rugged Extreme 7214 System BIOS

再起動が必要です 自動インストール済み このファイルは、最新の更新プログラムの一部として自動的にインストールされました。問題が発生した場合は、手動でダウンロードして再インストールすることができます。
このページのコンテンツは自動翻訳されている可能性があります。フィードバックを提供するには、ページの下部にあるフォームに入力してください。
This package contains the Dell system BIOS update. BIOS is a firmware package that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices. This update addresses the Intel Security Advisories INTEL-SA-00125, INTEL-SA-00131, and INTEL-SA-00141. A security advisory is a statement when a security vulnerability impacts a product, and a remedy is available for the vulnerability.
Latitude 7414 Ruggedのすべてのドライバーを表示するには、次へ移動します: ドライバおよびダウンロード。
推奨
使用可能な最新バージョンのドライバーをロード中...

これはこのドライバーのDell検証済み最新バージョンです

これはこのドライバーのDell検証済み最新バージョンではありません

Latitude_7414_7214_5414_Rugged_1.20.0.exe | 10.45 MB
デバイスのサービス タグを入力して、このダウンロードとデバイスとの互換性を確認してください。
これは大容量ファイルです。接続速度によっては、ダウンロードに時間がかかる場合があります。

ファイル形式: フラッシュBIOS実行ファイル
ファイル名: Latitude_7414_7214_5414_Rugged_1.20.0.exe
ファイルサイズ: 10.45 MB
フォーマットの説明
このファイル形式は、BIOS実行ファイルで構成されています。システムをアップデートするには、この実行ファイルをダウンロードし、デスクトップまたはハードドライブに保存して、実行してください。BIOSをアップデートする場合、バッテリの充電レベルが10 %以上の状態で、お使いのシステムをAC電源に接続する必要があります。
ダウンロードの整合性を確認するには、チェックサムの値を検証してください。
MD5:
e32465145c5acecadb59f43bc5f97444
SHA1:
34e70b8b3c9ff0dd61e779965b1bd493e6c4c3a5
SHA-256:
4ea2324a0c8e4856d9a858166234d37077e6a7be74f82bc032ae816461894845

その他のアップデートを見る。SupportAssistを使用すると、お使いのデバイス向けの最新のドライバー アップデートをすべて見つけることができます。

修正と強化

Fixes:
- Firmware updates to address the Intel Security Advisories INTEL-SA-00125 (CVE-2018-3655), INTEL-SA-00131 (CVE-2018-3643 and CVE-2018-3644), and INTEL-SA-00141 (CVE-2018-3657, CVE-2018-3658, and CVE-2018-3616).

Enhancements:
- Updated the UEFI compliance level to version 2.6
詳細を見る

バージョン

1.20.0, 1.20.0

リリース日:

30 8月 2018

ダウンロード タイプ

システムBIOS

カテゴリ

BIOS

重要度

重大
デル・テクノロジーズでは、このアップデートをすぐに適用することを強くお勧めします。このアップデートには、Dell製システムの機能、信頼性、安定性を向上させる重要なバグ修正と変更が含まれています。セキュリティ修正やその他の機能拡張も含まれている場合があります。
BIOS updates take no more than 5 minutes to be installed on your system. You can install the updates in the background while using the system.
1.46.008 5月 2024
1.45.012 4月 2024
1.44.005 2月 2024
1.43.007 12月 2023
1.42.015 11月 2023
1.41.031 8月 2023
1.40.031 3月 2023
1.39.009 12月 2022
1.38.112 10月 2022
1.37.014 9月 2022
1.36.016 8月 2022
1.35.002 6月 2022
1.34.013 4月 2022
1.33.010 1月 2022
1.32.021 12月 2021
1.31.009 11月 2021
1.30.030 8月 2021
1.29.027 7月 2021
1.28.012 4月 2021
1.27.211 1月 2021
1.26.014 8月 2020
1.25.105 6月 2020
1.24.022 7月 2019
1.23.015 3月 2019
1.22.009 1月 2019
1.21.030 10月 2018
1.18.002 7月 2018
1.15.006 2月 2018
1.14.031 10月 2017
1.12.006 7月 2017
1.11.012 5月 2017
1.10.028 4月 2017
1.9.028 4月 2017
1.8.030 3月 2017
1.7.027 1月 2017
1.6.006 12月 2016
1.4.008 8月 2016
1.1.007 6月 2016
Dell Latitude E5404 (ATG)
Updating the BIOS from Windows

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Download and Installation
1. Click Download File.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file.
4. Double-click the new file.
5. The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.

Updating the BIOS from BIOS Boot Menu (independent of operating system)

Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If BitLocker is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Note 3: Your system requires a restart after installing the BIOS. The restart can be deferred but must be completed to ensure that the update is installed.

Installation
1. Copy the downloaded file to a USB drive. You do not need a bootable USB drive.
2. Insert the USB drive into any USB port.
3. Power on the system.
4. At the DELL logo screen, press F12 to access the one-time boot menu.
5. Select BIOS Flash Update in the Other Options section.
6. Click the ... button to browse the USB drive to locate the downloaded file.
7. Select the file and click OK.
8. Verify the existing system BIOS information and the BIOS update information.
9. Click Begin Flash Update.
10. Review the Warning message and click Yes to proceed with the update.
The system restarts and displays a Flash Progress bar at the Dell logo screen. The system restarts again when the Flash update is complete.

BIOSの問題についてサポートが必要ですか?

DellのBIOSのトラブルシューティングおよび使用方法に関するガイドで解決策をお探しください。

ドライバのヘルプとチュートリアル