BIOSのアップデート中に、PCの電源をオフにしたり、コンセントを外したりしないでください。PCに障害が発生する可能性があります。アップデート中にPCが再起動し、一時的に黒い画面が表示されることがあります。
アップデートする前に、インストール手順と以下に記載されている重要な情報をお読みください。
Dell Precision Workstation T7910
再起動が必要です 自動インストール済み このファイルは、最新の更新プログラムの一部として自動的にインストールされました。問題が発生した場合は、手動でダウンロードして再インストールすることができます。このページのコンテンツは自動翻訳されている可能性があります。フィードバックを提供するには、ページの下部にあるフォームに入力してください。
Precision Tower 7910 System BIOS
Precision Tower 7910のすべてのドライバーを表示するには、次へ移動します: ドライバおよびダウンロード。
推奨
使用可能な最新バージョンのドライバーをロード中...
これはこのドライバーのDell検証済み最新バージョンです
これはこのドライバーのDell検証済み最新バージョンではありません
T7910A06.exe | 9 MB>デバイスのサービス タグを入力して、このダウンロードとデバイスとの互換性を確認してください。
これは大容量ファイルです。接続速度によっては、ダウンロードに時間がかかる場合があります。
ファイル形式:
フラッシュBIOS実行ファイル
ファイル名:
T7910A06.exe
ファイルサイズ:
9 MB
フォーマットの説明
このファイル形式は、BIOS実行ファイルで構成されています。システムをアップデートするには、この実行ファイルをダウンロードし、デスクトップまたはハードドライブに保存して、実行してください。BIOSをアップデートする場合、バッテリの充電レベルが10 %以上の状態で、お使いのシステムをAC電源に接続する必要があります。
ダウンロードの整合性を確認するには、チェックサムの値を検証してください。
MD5:
35993680ce1fa1ac8351ecc4370cc55c
SHA1:
81139f7a9b2b64436e960d75418715a7792903c9
SHA-256:
f39c2290b481174efcf4168f1381b0228fa28811104fd8f80debb3ccfcca666e
その他のアップデートを見る。SupportAssistを使用すると、お使いのデバイス向けの最新のドライバー アップデートをすべて見つけることができます。
修正と強化
1. Improved Fan Speed Control methodology to allow for a maximum mode when set to 100. Fans will spin at 100% of rated RPM.
2. Improved PCI bus allocation scheme.
3. Added support for Liquid Cooling.
4. Added Dynamic Memory Mapped IO switch to improve memory allocation with Windows 7 32-bit in some configurations.
5. Added Intel NVMe PCIE SSD P3700 support.
詳細を見る
2. Improved PCI bus allocation scheme.
3. Added support for Liquid Cooling.
4. Added Dynamic Memory Mapped IO switch to improve memory allocation with Windows 7 32-bit in some configurations.
5. Added Intel NVMe PCIE SSD P3700 support.
バージョン
A06
リリース日:
02 2月 2015
ダウンロード タイプ
システムBIOS
カテゴリ
BIOS
重要度
推奨デル・テクノロジーズでは、次に予定されているアップデート時に、このアップデートを適用することをお勧めします。このアップデートには、システム全体の正常性を維持するための変更が含まれています。これにより、システム ソフトウェアが最新の状態に保たれるとともに、システム ソフトウェアと他のシステム モジュール(ファームウェア、BIOS、ドライバー、ソフトウェア)との互換性が維持されます。また、その他の新機能が追加される場合もあります。
Dell Precision Tower 7910 Bios
BIOS Update Executable for Windows/OS independent
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect
Perform the BIOS update from the BIOS Boot Menu, independent of operating system.
1. Copy the downloaded file to a USB flash device. It does not need to be bootable
2. Insert the USB flash device into any USB port
3. Power on the system
4. At the DELL logo screen, press F12 to access the one time boot menu
5. Select "BIOS Flash Update" in the "Other Options" section
6. Click on the "..." button to browse the USB flash device to locate the downloaded file
7. Select the file and click "Ok"
8. Confirm the Existing System BIOS Information and the BIOS Update Information are as expected
9. Click "Begin Flash Update"
10. Reviewing the Warning message and click "Yes" to proceed with the update
11. The system should restart and show a Flash Progress bar on the Dell logo screen as the BIOS update is being performed
12. The system will restart once again when the Flash update is complete
Note 1: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system. If you don't enable BitLocker on your system you can ignore it
Download
1. Click Download File to download the file.
2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment
1. Browse to the location where you downloaded the file and double-click the new file.
2. Windows System will auto restart and update BIOS while system startup screen.
3. After BIOS update finished, system will auto reboot to take effect
Perform the BIOS update from the BIOS Boot Menu, independent of operating system.
1. Copy the downloaded file to a USB flash device. It does not need to be bootable
2. Insert the USB flash device into any USB port
3. Power on the system
4. At the DELL logo screen, press F12 to access the one time boot menu
5. Select "BIOS Flash Update" in the "Other Options" section
6. Click on the "..." button to browse the USB flash device to locate the downloaded file
7. Select the file and click "Ok"
8. Confirm the Existing System BIOS Information and the BIOS Update Information are as expected
9. Click "Begin Flash Update"
10. Reviewing the Warning message and click "Yes" to proceed with the update
11. The system should restart and show a Flash Progress bar on the Dell logo screen as the BIOS update is being performed
12. The system will restart once again when the Flash update is complete
Note 1: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system. If you don't enable BitLocker on your system you can ignore it