Fixes - Fixed the Brightness hotkey loss pop up after flash BIOS - Fixed can't Coldboot to USB3.0 ODD when set CD/DVD as first boot device in BIOS - Fixed enter S3 and then flash BIOS in OS,system will enter S3 after shutdown - Fixed the 3rd place bootable device will change to "disable" after some action. - Fixed USB HDD without electric power can't boot from USB 3.0 port - Fixed system can't boot EPSA via press "Fn+PowerButton Enhancements - Enabled Discrete AMD VGA fixed mode Support - Implemented new Fresco USB 3.0 module support - Enabled some BIOS options that will auto-disable after doing some action - Updated ePSA to C_PG4213 - Disabled unused port - Implemented XHCI BIOS Handoff correctly
BIOS Update Executable for Windows/DOS Download 1. Click Download File, to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive. Run the BIOS update utility from Windows environment 1. Browse to the location where you downloaded the file and double-click the new file. 2. After BIOS update finished, system will auto reboot to take effect. Run the BIOS update utility from DOS environment (Non-Windows users) 1. Copy the downloaded file to a bootable DOS USB key. 2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt. 3. Run the file by typing copied file name where the executable is located. 4. After BIOS update finished, system will auto reboot to take effect. -------------------------------------------------------------------------------- Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files. Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system. If you don't enable BitLocker on your system you can ignore it.