The following updates were made to the A09 BIOS to create the A10 BIOS:
Issues Fixed:
1. Fixed issue where the system may fail to boot to CD if the
primary hard disk drive is not installed.
2. Fixed issue where the ACPI battery gauge may not always report
the correct percent capacity.
Enhancements:
1. Added 'Configure Passwords' field to the System Security page
in System Setup. This feature allows the system administrator
password to be used to prevent users from installing system or
hard disk drive passwords.
2. Added support for newer revisions of the Pentium 4 processor.
This file format consists of a BIOS executable file. To use it, download
the file and copy it to a DOS-bootable diskette. With the diskette in the
floppy drive, reboot the system and run the program.
Custom Instructions for I8200A10.TXT:
This file format contains plain text which can be viewed with a standard
text editor. Floppy Disk Boot to Disk for I82-A10.EXE
Download
1. Click Download Now, to download the file.
2. When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In:
window appears.
3. From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4. If the Download Complete window appears, click Close. The file
icon appears on your desktop.
Hard Drive Floppy Disk Creation
1. Get 1 blank, formatted floppy disks.
2. Double-click the new icon (it looks like a floppy diskette) on
the desktop. The Self-Extractor window appears.
3. Click Setup. An black MS-DOS window appears with a message
indicating that you need 1 floppy diskettes.
4. Press the [ENTER] key.
A message appears prompting you to insert a blank floppy diskette.
5. Insert a floppy disk into the floppy disk drive.
6. Press the [ENTER] key. A message appears indicating that all
data on the disk will be erased.
7. Press the [y] key and then press the [ENTER] key.
The files are copied to the floppy diskette. If the procedure requires
more than one diskette, repeat steps 5 – 7 until you reach the end of the diskette set.
8. After all the files have been copied to the last floppy disk,
press the [ENTER] key and the MS-DOS window closes.
Install
1. Insert the first (or the only) disk of the set into the Floppy
drive.
2. Click Start, click Shutdown, click Restart, and then click OK.
Windows XP Users need only click restart.
3. Follow the on-screen instructions.
Hard Drive Installation (via WinZip) with Setup.exe File for A10-I82.EXE
Download
1.Click Download Now, to download the file.
2.When the File Download window appears, click Save (Windows XP
users will click Save) this program to disk and click OK. The Save In:
window appears.
3.From the Save In: field, click the down arrow then click to
select Desktop and click Save. The file will download to your desktop.
4.If the Download Complete window appears, click Close. The file
icon appears on your desktop.
Install
1.Double-click the new icon on the desktop labeled A10-I82.EXE.
2.The Self-Extracting window appears and prompts you to extract or
unzip to C:\DELL\DRIVERS\r61062. Write down this path so the executable (I.e.
Setup.exe) file can be found later.
3.The Self-Extractor window appears.
4.Click OK.
5.After completing the file extraction, if the Self-Extractor
window is still open, close it.
6.Click the Start button and then click Run.
7.Type C:\DELL\DRIVERS\r61062 in the Open textbox and then click OK.
8.Follow the on-screen installation instructions.