BIOSのアップデート中に、PCの電源をオフにしたり、コンセントを外したりしないでください。PCに障害が発生する可能性があります。アップデート中にPCが再起動し、一時的に黒い画面が表示されることがあります。
アップデートする前に、インストール手順と以下に記載されている重要な情報をお読みください。
Dell Latitude E5430 System BIOS
再起動が必要です 自動インストール済み このファイルは、最新の更新プログラムの一部として自動的にインストールされました。問題が発生した場合は、手動でダウンロードして再インストールすることができます。このページのコンテンツは自動翻訳されている可能性があります。フィードバックを提供するには、ページの下部にあるフォームに入力してください。
This package contains the Dell system BIOS update. BIOS is a firmware that is embedded on a small memory chip on the system board. It controls the keyboard, monitor, disk drives, and other devices.
Latitude E5430のすべてのドライバーを表示するには、次へ移動します： ドライバおよびダウンロード。
推奨
使用可能な最新バージョンのドライバーをロード中...
これはこのドライバーのDell検証済み最新バージョンです
これはこのドライバーのDell検証済み最新バージョンではありません
5430A17V.exe | 8.34 MBデバイスのサービス タグを入力して、このダウンロードとデバイスとの互換性を確認してください。
これは大容量ファイルです。接続速度によっては、ダウンロードに時間がかかる場合があります。
ファイル形式:
Windows/DOS用CPG BIOS実行ファイル
ファイル名:
5430A17V.exe
ファイルサイズ:
8.34 MB
フォーマットの説明
このファイル形式は、BIOS実行ファイルで構成されています。ユニバーサル（Windows/MS DOS）形式を使用することで、あらゆるWindows環境やMS DOS環境でインストールできます。
ダウンロードの整合性を確認するには、チェックサムの値を検証してください。
MD5:
df13eed7cabb4abdeb4c3524eecdece7
SHA1:
dbee255c1a098c9274de92c9be5f37d3218eb429
SHA-256:
4e5ff4cd129f3f015dc332b4d3ebd13561dd7b22616e801d3cf9eead5772de62
自動スキャンを使用するには、管理者としてWindowsにサインインしてください。すでに管理者としてサインインしていて、このメッセージが表示されている場合は、再起動してください。
お客様のシステムは貴社のIT管理者によって管理されおり、機能が制限されている可能性があります。
その他のアップデートを見る。SupportAssistを使用すると、お使いのデバイス向けの最新のドライバー アップデートをすべて見つけることができます。
修正と強化
Fixes:
- Fixed the issue where the Intel Trusted Execution Technology (Intel TXT) option is available when the Intel Virtualization Technology for Directed I/O (VT-d) is disabled in BIOS Setup menu.
- Fixed the issue where the Intel Active Management Technology (AMT) loses connection without the Intel Management Engine Interface Driver.
Enhancements:
- Enhanced the BIOS security feature.
- Updated the master password algorithm.
- Updated the SMM runtime support.
- Updated the Intel Management Engine firmware.
詳細を見る
- Fixed the issue where the Intel Trusted Execution Technology (Intel TXT) option is available when the Intel Virtualization Technology for Directed I/O (VT-d) is disabled in BIOS Setup menu.
- Fixed the issue where the Intel Active Management Technology (AMT) loses connection without the Intel Management Engine Interface Driver.
Enhancements:
- Enhanced the BIOS security feature.
- Updated the master password algorithm.
- Updated the SMM runtime support.
- Updated the Intel Management Engine firmware.
バージョン
A17, A17
リリース日:
26 10月 2016
ダウンロード タイプ
システムBIOS
カテゴリ
BIOS
重要度
推奨デル・テクノロジーズでは、次に予定されているアップデート時に、このアップデートを適用することをお勧めします。このアップデートには、システム全体の正常性を維持するための変更が含まれています。これにより、システム ソフトウェアが最新の状態に保たれるとともに、システム ソフトウェアと他のシステム モジュール（ファームウェア、BIOS、ドライバー、ソフトウェア）との互換性が維持されます。また、その他の新機能が追加される場合もあります。
重要な情報
Dell Fast Boot BIOS Feature:
The Dell Windows 8 released BIOS adds a new feature that is called Fast Boot.
When upgrading from a Pre-Windows 8 released BIOS to a Windows 8 released BIOS this feature will be set in Thorough mode.
Setting this feature in minimal causes USB devices/ports to be disabled in the pre-OS environment.
If you are dependent on USB devices in the pre-OS environment this setting should remain in the Thorough mode setting.
Upgrading between Currently Released BIOS Images (Pre-Windows 8 released BIOS) and Windows 8 Feature Enhanced BIOS Images (Windows 8 released BIOS)
The new Windows 8 released BIOS contains new features and behavior, but the upgrade process for you is still unchanged.
Run the EXE application and the BIOS handles incorporating the new features and logic with your current settings.
After the upgrade, you will immediately see that one of the visible changes is the logo screen during boot, which only displays the logo at a larger size with no other information or text.
The Dell Windows 8 released BIOS adds a new feature that is called Fast Boot.
When upgrading from a Pre-Windows 8 released BIOS to a Windows 8 released BIOS this feature will be set in Thorough mode.
Setting this feature in minimal causes USB devices/ports to be disabled in the pre-OS environment.
If you are dependent on USB devices in the pre-OS environment this setting should remain in the Thorough mode setting.
Upgrading between Currently Released BIOS Images (Pre-Windows 8 released BIOS) and Windows 8 Feature Enhanced BIOS Images (Windows 8 released BIOS)
The new Windows 8 released BIOS contains new features and behavior, but the upgrade process for you is still unchanged.
Run the EXE application and the BIOS handles incorporating the new features and logic with your current settings.
After the upgrade, you will immediately see that one of the visible changes is the logo screen during boot, which only displays the logo at a larger size with no other information or text.
適応先
Dell Latitude E5430
インストール手順
Updating the BIOS from Windows
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Download and Installation
1. Click Download File, to download the file.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file and double-click the new file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS (Non-Windows users)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Installation
Note: You must provide a bootable USB drive. This executable file does not create the DOS system files.
1. Copy the downloaded file to a bootable USB drive.
2. Power on the system and then Press the F12 key.
3. Select USB Storage Device and boot to the DOS prompt.
4. Run the file by typing following command. For example:
C:\ Latitude_E5430_X.Y.Z.exe
Where C is the drive letter of the USB device where the executable file is located and Latitude_E5430_X.Y.Z.exe is the name of the downloaded file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS with UEFI boot mode enabled (Non-Windows users, Load Legacy Option Disabled)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Installation
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing the F2 key.
3. Go to General > Boot Sequence > Boot > Boot List Option.
4. Change UEFI to Legacy of Boot List Option.
5. Go to Exit > Save Changes and reboot system.
6. Press F12 and then select USB Storage Device and boot to the DOS prompt.
7. Run the file by typing the file name.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, the system restarts again.
8. Go to BIOS Setup by pressing the F2 key and go to General > Boot Sequence > Boot > Boot List Option.
9. Change Legacy to UEFI Boot Option.
10. Go to Exit > Save Changes, and reboot the system.
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Download and Installation
1. Click Download File, to download the file.
2. Click Save to save the file to your hard drive.
3. Browse to the location where you downloaded the file and double-click the new file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS (Non-Windows users)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off power or interrupt the BIOS update process during the update.
Installation
Note: You must provide a bootable USB drive. This executable file does not create the DOS system files.
1. Copy the downloaded file to a bootable USB drive.
2. Power on the system and then Press the F12 key.
3. Select USB Storage Device and boot to the DOS prompt.
4. Run the file by typing following command. For example:
C:\ Latitude_E5430_X.Y.Z.exe
Where C is the drive letter of the USB device where the executable file is located and Latitude_E5430_X.Y.Z.exe is the name of the downloaded file.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, system restarts again.
Updating the BIOS from DOS with UEFI boot mode enabled (Non-Windows users, Load Legacy Option Disabled)
Note 1: Before updating the BIOS, ensure that you suspend BitLocker encryption on a BitLocker-enabled system. If it is not enabled on your system, you can ignore this step. For information about how to disable BitLocker, see How to Enable or Disable BitLocker with TPM in Windows at support.dell.com.
Note 2: Do not turn off the power or interrupt the BIOS update process during the update.
Installation
1. Copy the downloaded file to a bootable DOS USB drive.
2. Power on the system and then go to BIOS Setup by pressing the F2 key.
3. Go to General > Boot Sequence > Boot > Boot List Option.
4. Change UEFI to Legacy of Boot List Option.
5. Go to Exit > Save Changes and reboot system.
6. Press F12 and then select USB Storage Device and boot to the DOS prompt.
7. Run the file by typing the file name.
The system restarts automatically and updates the BIOS at the system startup screen. After the BIOS update is complete, the system restarts again.
8. Go to BIOS Setup by pressing the F2 key and go to General > Boot Sequence > Boot > Boot List Option.
9. Change Legacy to UEFI Boot Option.
10. Go to Exit > Save Changes, and reboot the system.