Fixes - Address the hard disk password port naming and which follow the SATA port number. - Address there is no 'Clear' option under 'TPM2.0 Security' item in BIOS Setup Menu with M.2 NVME SKU. - Address there is no event log in ePSA Advanced page. - Address BIOS recovery feature will not be execute when end user would like recovery to previously BIOS by USB key. - Address system couldn't execute the BIOS recovery when system with M.2 NVME device. - Address system couldn't PXE boot after system wake up from LAN. - Address system couldn't PXE boot when set LAN be the first boot device. - Address Dell Logo became oval when connect to Canvas 27 monitor and through USB type C to USB3.1 cable. - Address M.2 SATA SSD still could be detect when end user disabled it in BIOS setup menu already. - Address system couldn't boot from ODD when end user select it in RAID mode.
Enhancements - Enhance Excalibur function check. - Enhance entry BIOS Setup Menu by press F2/F12 after key-in hard disk password. - Enhance the discrete graphics name in 'Primary Display' in BIOS Setup Menu. - Enhance the ODD icon in Boot Option under Boot Menu. - Implement the guidance in 'Primary Display' page in BIOS Setup Menu.
Download 1. Click "Download File", to download the file. 2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment 1. Browse to the location where you downloaded the file and double-click the new file. 2. Windows System will auto restart and update BIOS while system startup screen. 3. After BIOS update finished, system will auto reboot to take effect.
Perform the BIOS update from the BIOS Boot Menu, independent of operating system, if BIOS supported 1. Copy the downloaded file to a USB flash device. It does not need to be bootable. 2. Insert the USB flash device into any USB port. 3. Power on the system. 4. At the DELL logo screen, press F12 to access the one time boot menu. 5. Select "BIOS Update" in the section. 6. Click on the "Flash from file" to browse the USB flash device to locate the downloaded file. 7. Select the file and click "Submit" 8. Confirm the Existing System BIOS Information and the BIOS Update Information are as expected. 9. Click "Update BIOS!" 10. Reviewing the Warning message and click "Confirm Update BIOS!" to proceed with the update. 11. The system should restart and show a Flash Progress bar on the Dell logo screen as the BIOS update is being performed. 12. The system will restart once again when the Flash update is complete. -------------------------------------------------------------------------------------------------- Note 1: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system. If you don't enable BitLocker on your system you can ignore it.