Fixes/Enhancements ------------------ Fixes: - Fix the visual effect while performing Intel AMT remote control. - Fix the LED indication behavior under BIOS recovery scenario. - Fix the wrong behavior while using HDD for BIOS recovery. - Fix the problem of using some USB devices on Dell dock.
Enhancements: - Update CPU Microcode 0x0406E3 to Rev 0x9E. - Update Dell Diagnostic ePSA to 4300.26. - Update Dell features for battery. - Enhance platform security.
Download 1. Download the file XPS_9250_Latitude_7275_1.1.20.exe 2. When the File Download window appears, click Save to save the file to your hard drive.
Run the BIOS update utility from Windows environment 1. Browse to the location where you downloaded the file and double-click the new file. 2. Windows System will auto restart and update BIOS while system startup screen. 3. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if Legacy Boot Mode(Non-Windows users) 1. Copy the downloaded file to a bootable DOS USB key. 2. Power on the system, then Press F12 key and Select "USB Storage Device" and Boot to DOS prompt. 3. Run the file by typing copied file name where the executable is located. 4. DOS System will auto restart and update BIOS while system startup screen. 5. After BIOS update finished, system will auto reboot to take effect.
Run the BIOS update utility from DOS environment if UEFI boot mode with Load Legacy Option disabled (Non-Windows users) 1. Copy the downloaded file to a bootable DOS USB key. 2. Power on the system, then go to BIOS Setup by pressing F2 and go to "General-Boot Sequence - Boot List Option". 3. Change "UEFI" to "Legacy" of Boot List Option. 4. Click "Apply","Exit" to save changes and reboot system. 5. Press F12, then Select "USB Storage Device" and Boot to DOS prompt. 6. Run the file by typing copied file name where the executable is located. 7. DOS system will auto restart and update BIOS while system startup screen. 8. After BIOS update finished, system will auto reboot. 9. Go to BIOS Setup by pressing F2 and go to "General > Boot Sequence > Boot List Option". 10. Change "Legacy" to "UEFI" Boot Option. 11. Go to "Exit > Exit Save Changes" and reboot system.
-------------------------------------------------------------------------------- Note 1: You will need to provide a bootable DOS USB key. This executable file does not create the DOS system files. Note 2: Please make sure you suspend BitLocker encryption before updating BIOS on a BitLocker enabled system. If you don't enable BitLocker on your system you can ignore it.