PowerStore Alerts: Node IPMI BMC Connection Alert
Oversigt: This article details error alerts generated when PowerStore system software is unable to communicate with the nodes Baseboard Management Controller (BMC).
Denne artikel gælder for
Denne artikel gælder ikke for
Denne artikel er ikke knyttet til et bestemt produkt.
Det er ikke alle produktversioner, der er identificeret i denne artikel.
Symptomer
When Dell PowerStore encounters a problem, an error alert is generated to help identify the issue. This article explains the different possible causes and the relevant solutions for these error alerts. If your problem is not resolved despite the solution that is provided, check the technical support contact options.
Note: Cannot find the information needed? Let us know using the feedback form at the bottom of this article.
| Alert ID | XMS_NODE_IPMI_CONNECTION_STATE_DISCONNECTED |
| Alert Text | Node Intelligent Platform Management Interface (IPMI) BMC connection is no longer active. |
| Error Code | (0x00305503) |
| Resolution | Cause
This event occurs when the system software unable to communicate with the nodes Baseboard Management Controller (BMC). The system software uses the BMC to monitor the hardware so a failure to communicate means we cannot accurately reflect the state of the hardware. In addition to this alert, the BMC communication problem may cause other Base Enclosure hardware alerts to be raised (that is power supplies or Backup Battery Unit (BBUs)). Solution 1. Often the communications problem is temporary and clear itself without any intervention and no additional action is required. 2. If the condition persists for more than 30 minutes, corrective action must be taken, contact technical support for further assistance. |
Årsag
N/A
Løsning
N/A
Berørte produkter
PowerStoreArtikelegenskaber
Artikelnummer: 000130723
Artikeltype: Solution
Senest ændret: 19 apr. 2026
Version: 8
Find svar på dine spørgsmål fra andre Dell-brugere
Supportservices
Kontrollér, om din enhed er dækket af supportservices.