Data Domain: How to change the sync alert threshold

Oversigt: This article explains how to change the sync alert threshold using the command line. By default, the sync alert threshold is set to 24 hours. However, based on specific requirements, it may need to be adjusted for a particular mtree to prevent the error: “Sync-as-of time is more than 24 hours ago.” ...

Denne artikel gælder for Denne artikel gælder ikke for Denne artikel er ikke knyttet til et bestemt produkt. Det er ikke alle produktversioner, der er identificeret i denne artikel.
Udforsk andre ressourcer

Instruktioner

  1. Use SSH to connect to the PowerProtect Data Domain with the admin privilege.
  2. Run the "replication option show" command to check the sync alert threshold.

    This image is to check the sync alert threshold value using command "replication option show" 
  3. To change the default value to different hours we need to use command "replication option set default-sync-alert-threshold <value>"

    Example of command to be run to change the value of sync alert threshold 
  4. The filesystem must be restarted to effect this change. 
    filesys restart

 

 

Berørte produkter

Data Domain
Artikelegenskaber
Artikelnummer: 000462922
Artikeltype: How To
Senest ændret: 11 maj 2026
Version:  1
Find svar på dine spørgsmål fra andre Dell-brugere
Supportservices
Kontrollér, om din enhed er dækket af supportservices.