Zu den Hauptinhalten
  • Bestellungen schnell und einfach aufgeben
  • Bestellungen anzeigen und den Versandstatus verfolgen
  • Erstellen Sie eine Liste Ihrer Produkte, auf die Sie jederzeit zugreifen können.
  • Verwalten Sie mit der Unternehmensverwaltung Ihre Dell EMC Seiten, Produkte und produktspezifischen Kontakte.

Microphone Not Working Due to Privacy Settings in Windows 11 or Windows 10

Zusammenfassung: This article provides information about how to resolve microphone issues caused due to privacy settings in Windows 11 or Windows 10.

Dieser Artikel wurde möglicherweise automatisch übersetzt. Wenn Sie eine Rückmeldung bezüglich dessen Qualität geben möchten, teilen Sie uns diese über das Formular unten auf dieser Seite mit.

Artikelinhalt


Symptome

If your microphone suddenly stops working, but the microphone is listed in Device Manager. You've tested other microphones and they are having the same problem. You checked and the audio levels are set as they should be and the microphone is not muted. However when you run the Microphone Wizard it gives the following error.

Wizard could not launch error when accessing the microphone

Figure 1: The Wizard could not start

Ursache

The privacy settings for microphone in Windows 11 or Windows 10 might prevent apps and websites from using the microphone of your computer. Privacy settings give you control over which apps and websites can use your microphone.

Lösung

This error is usually tied to privacy issues in Windows 11 or Windows 10. Follow these steps to resolve microphone-related issues.

  1. Using the start menu, open Settings

  2. Go to Privacy

  3. Scroll down the left-hand side and select Microphone under App Permissions

  4. Toggle on Allow apps to access your microphone

  5. Test that this has resolved your error.

Weitere Informationen

Artikeleigenschaften


Betroffenes Produkt

Alienware, Inspiron, OptiPlex, Vostro, XPS, G Series, G Series, Alienware, Inspiron, Latitude, Vostro, XPS, Fixed Workstations, Mobile Workstations

Letztes Veröffentlichungsdatum

21 Dez. 2023

Version

5

Artikeltyp

Solution