VMware ESXi: How to Add an Existing Hard Disk to a Virtual Machine in vSphere ESXi

See VMware article Add an Existing Hard Disk to a Virtual Machine

You can add an existing virtual hard disk to a virtual machine when you customize the virtual machine hardware during the virtual machine creation process or after the virtual machine is created. For example, you may want to add an existing hard disk that is preconfigured as a boot disk.

During virtual machine creation, a hard disk and a SCSI or SATA controller are added to the virtual machine by default, based on the guest operating system that you select. If this disk does not meet your requirements, you can remove it and add an existing hard disk at the end of the creation process.

Prerequisites

• Ensure that you are familiar with controller and virtual device node behavior for different virtual hard disk configurations. See Add a Hard Disk to a Virtual Machine.
• Before you add disks greater than 2 TB to a virtual machine, see Large Capacity Virtual Disk Conditions and Limitations.
• Verify that you have the Virtual machine configuration. Add existing disk privilege on the destination folder or datastore.

Procedure

1. Right-click a virtual machine in the inventory and select Edit Settings.
2. (Optional) To delete the existing hard disk, move your pointer over the disk and click the Remove icon.
   The disk is removed from the virtual machine. If other virtual machines share the disk, the disk files are not deleted.
3. On the Virtual Hardware tab, click the Add New Device button.
4. Select Existing Hard Disk from the drop-down menu. The Select File dialog box opens.
5. In the Select File dialog box, expand a datastore, select a Virtual Machine folder, and select the Disk to add.
6. Click OK. The disk file appears in the Contents column. The File Type drop-down menu shows the compatibility file types for this disk.
7. (Optional) Expand New Hard disk and make further customizations for the hard disk.
8. Click OK.