Connectrix: How to Change the Device-Alias Mode from Enhanced to Basic
Summary: When a device alias mode is changed from basic mode to enhanced mode, the corresponding applications are informed about the change. The applications then start accepting the device alias-based configuration in the native format. ...
Αυτό το άρθρο ισχύει για
Αυτό το άρθρο δεν ισχύει για
Αυτό το άρθρο δεν συνδέεται με κάποιο συγκεκριμένο προϊόν.
Δεν προσδιορίζονται όλες οι εκδόσεις προϊόντων σε αυτό το άρθρο.
Instructions
Command to change the mode after modifying the zoning:
switch# config t switch(config)# no device-alias mode enhanced
Changing Mode Settings
When a device alias mode is changed from basic mode to enhanced mode, the corresponding applications are informed about the change. The applications then start accepting the device alias-based configuration in the native format.
Note: Because the device alias was previously running in the basic mode, the applications do not have any prior native device alias configuration.
The applications check for an existing device alias configuration in the native format. If the device alias is in the native format, the applications reject the request, and the device alias mode cannot be changed to basic.
All the native device alias configurations (both on local and remote switches) must be explicitly removed, or all the device alias members must be replaced with the corresponding World Wide Port Names (WWPN) before changing the mode back to basic.
Επηρεαζόμενα προϊόντα
Connectrix, Connectrix MDS-Series HardwareΙδιότητες άρθρου
Article Number: 000366513
Article Type: How To
Τελευταία τροποποίηση: 31 Οκτ 2025
Version: 2
Βρείτε απαντήσεις στις ερωτήσεις σας από άλλους χρήστες της Dell
Υπηρεσίες υποστήριξης
Ελέγξτε αν η συσκευή σας καλύπτεται από τις Υπηρεσίες υποστήριξης.