Avamar:Gen4T - RMM4 rootユーザーを代替ユーザー名に再構成する方法
Summary: RMM4 rootユーザーを代替ユーザー名に再構成する方法(エラー メッセージ: Login failed.ユーザーには[組み込み管理ソフトウェアへのログイン]権限がありません。)
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
すべてのコマンドは、RMM4ユーザーが設定されているノードでrootとして実行します。
-
RMM4が専用アクセス用に構成されていることを確認します(有効なIPアドレスが構成されていない場合は、「lan print 4」を「lan print 1」に置き換えて共有アクセスを確認します)。
root@avamar:~/#: ipmitool lan print 4 |egrep "IP Address|Subnet Mask|Default Gateway" |egrep -v "Source|Header|Backup|MAC" IP Address : 10.70.193.19 Subnet Mask : 255.255.255.128 Default Gateway IP : 10.70.193.126
-
構成済みのユーザーを一覧表示するには(RMMアクセスが共有として構成されている場合は、「summary 4」を「summary 1」に、「list 4」を「list 1」に置き換えます)。
root@avamar:~/#: ipmitool user summary 4 Maximum IDs : 16 Enabled User Count : 1 Fixed Name Count : 1 root@avamar:~/#: ipmitool user list 4 ID Name Callin Link Auth IPMI Msg Channel Priv Limit 2 root true true true ADMINISTRATOR
-
ユーザーID#2 [root]の名前を変更するには(ここで、「NewName」は目的のユーザー名に置き換え、「Password」を目的のパスワードに置き換える必要があります):
root@avamar:~/#: ipmitool user set name 2 NewName root@avamar:~/#: ipmitool user set password 2 Password root@avamar:~/#: ipmitool user enable 2 root@avamar:~/#: ipmitool channel setaccess 4 2 link=on ipmi=on callin=on privilege=4 root@avamar:~/#: ipmitool channel getaccess 4 2 Maximum User IDs : 16 Enabled User IDs : 1 User ID : 2 User Name : NewName Fixed Name : No Access Available : call-in / callback Link Authentication : enabled IPMI Messaging : enabled Privilege Level : ADMINISTRATOR
-
ユーザーを再度一覧表示します。
root@avamar:~/#: ipmitool user list 4 ID Name Callin Link Auth IPMI Msg Channel Priv Limit 2 NewName true true true ADMINISTRATOR
Additional Information
その他の便利なコマンド:
-
RMM4ネットワーク構成を一覧表示するには(適切に構成するには、 KB490977を参照してください)。
root@avamar:~/#: ipmitool lan print 4 Set in Progress : Set Complete Auth Type Support : NONE MD2 MD5 PASSWORD OEM Auth Type Enable : Callback : : User : : Operator : : Admin : MD5 : OEM : IP Address Source : Static Address IP Address : 10.70.193.19 Subnet Mask : 255.255.255.128 MAC Address : 00:60:16:72:59:42 SNMP Community String : public IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10 BMC ARP Control : ARP Responses Enabled, Gratuitous ARP Disabled Gratituous ARP Intrvl : 2.0 seconds Default Gateway IP : 10.70.193.126 Default Gateway MAC : 00:00:00:00:00:00 Backup Gateway IP : 0.0.0.0 Backup Gateway MAC : 00:00:00:00:00:00 802.1q VLAN ID : Disabled 802.1q VLAN Priority : 0 RMCP+ Cipher Suites : 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 Cipher Suite Priv Max : Not Available
-
BMC/RMM4コールド リセットを実行するには、次の手順を実行します(ノードがオンラインの場合は使用しないでください)。
root@avamar:~/#: ipmitool mc reset cold root@avamar:~/#: sleep 120 root@avamar:~/#:
-
BMC/RMM4 ウォームリセットを実行するには (ノードがオンラインの場合は使用しないように注意してください)。
root@avamar:~/#: ipmitool mc reset warm root@avamar:~/#: sleep 120 root@avamar:~/#:
-
チャネル 4 の情報を一覧表示するには、次の手順を実行します。
root@avamar:~/#: ipmitool channel info 4 Channel 0x4 info: Channel Medium Type : 802.3 LAN Channel Protocol Type : IPMB-1.0 Session Support : multi-session Active Session Count : 0 Protocol Vendor ID : 7154 Volatile(active) Settings Alerting : disabled Per-message Auth : enabled User Level Auth : enabled Access Mode : always available Non-Volatile Settings Alerting : disabled Per-message Auth : enabled User Level Auth : enabled Access Mode : always available
-
RMM4/BMC技術情報を一覧表示するには、次の手順を実行します。
root@avamar:~/#: ipmitool -I open bmc info Device ID : 16 Device Revision : 0 Firmware Revision : 17.30 IPMI Version : 2.0 Manufacturer ID : 1139 Manufacturer Name : EMC Corporation Product ID : 34 (0x0022) Product Name : Unknown (0x22) Device Available : yes Provides Device SDRs : no Additional Device Support : Sensor Device SDR Repository Device SEL Device FRU Inventory Device IPMB Event Receiver Bridge Chassis Device Aux Firmware Rev Info : 0x01 0x00 0x00 0x00
Affected Products
AvamarProducts
Avamar, Avamar Data Store Gen4TArticle Properties
Article Number: 000022565
Article Type: How To
Last Modified: 12 Nov 2025
Version: 7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.