Dell Unity：如何使用 CLI 设置 ESRS Integrated

Summary: 以下是在 Unity 阵列上使用 CLI 启用集成 ESRS 时可以采取的步骤。（用户可纠正）

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

本知识库文章旨在介绍使用 CLI 在 Unity 阵列上配置和调配 ESRS Integrated 所需的步骤。

步骤 1：设置联系信息
以下命令用于显示和设置联系人信息。

uemcli -u local/admin -securepassword /sys/info show
uemcli -u local/admin -securepassword /sys/info set -contactFirstName <First> -contactLastName <Last> -contactEmail <Email> -contactPhone <Phone#>

步骤 2：验证 EMC 在线支持帐户。
以下命令用于显示和设置用于注册 Unity 阵列的 EMC 在线支持帐户。

uemcli -u local/admin -securepassword /sys/support/account show
uemcli -u local/admin -securepassword /sys/support/account set -user <EMC Online Support account> -passwdSecure <pass>

步骤 3：检查 EULA。
以下命令用于显示和接受 EULA 许可证。

uemcli -u local/admin -securepassword /sys/support/esrsi show
uemcli -u local/admin -securepassword /sys/support/esrsi set -acceptEula yes   (***If not already accepted***)

步骤 4：为 ESRS 运行 networkCheck。

uemcli -u local/admin -securepassword /sys/support/esrsi checkNetwork

第 5 步：请求 AccessCode
以下命令用于向 support.emc.com 请求 AccessCode。此 AccessCode 将发送到步骤 2 中指定的 EMC 在线支持帐户电子邮件。

uemcli -u local/admin -securepassword /sys/support/esrsi requestAccessCode

步骤 6：查看站点信息。
以下命令用于查看和验证您的帐户有权访问的一个或多个站点。

uemcli -u local/admin -securepassword /sys/support/esrsi/site show -accessCode <code> -detail

步骤 7：在 SiteId 上启用 ESRS。
以下命令是最后一步，在该步骤中，您可以使用步骤 6 中的站点 ID 为阵列启用 ESRS。如果在步骤 6 中返回多个站点，请确保指定了正确的站点。

uemcli -u local/admin -securepassword /sys/support/esrsi set -enable yes -siteId <siteid>

来自 CLI 的命令输出

 13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/info show
Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Contact first name    =
      Contact last name     =
      Contact company       =
      Contact email address =
      Contact phone number  =
      Location name         =

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/info set -contactFirstName John -contactLastName Doe -contactEmail Globe@myCompany.com -contactPhone 1234567890

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/account show

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Support user name =

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/account set -user Globe@myCompany.com -passwdSecure

Password:
Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/esrsi show

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Enabled       = no
      EULA accepted = no

13:39:39 service@(AtomicFireball) spb:~> uemcli -u local/admin -password MyPassword /sys/support/esrsi set -acceptEula yes

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

21:00:08 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi checkNetwork

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

21:14:08 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi requestAccessCode

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Recipient email address =  G*****@myCompany.com.

Operation completed successfully.

21:15:22 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi/site show -accessCode 123456 -detail

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

1:    Site ID          = 123456
      Party ID         = 987654321
      Site name        = My Company
      Site description =
      Address          = 123 My Address
      State            = MA
      Country          = US
      Country name     =
      City             = Hopkinton
      Current location = yes

21:20:46 service@(none) spb:/> uemcli -u local/admin -password MyPassword /sys/support/esrsi set -enable yes -siteId 123456

Storage system address: 127.0.0.1
Storage system port: 443
HTTPS connection

Operation completed successfully.

 

Affected Products

Dell EMC Unity Family

Products

Dell Unity 300, Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 550F, Dell EMC Unity 600, Dell EMC Unity 600F, Dell EMC Unity 650F , Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity Hybrid ...
Article Properties
Article Number: 000022686
Article Type: How To
Last Modified: 27 Nov 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.