Connectrix B-Series：問題：程序 0.weblinker.fcg 的 SCN 佇列溢位

Summary: 注意到處理程序 0.weblinker.fcg 錯誤的 SCN 佇列溢位。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

2024/06/18-04:08:49 (GMT), [SCN-1001], 6077, SLOT 2 | FFDC | CHASSIS, CRITICAL, ED_DCX7_8B, SCN queue overflow for process 0.weblinker.fcg
2024/06/18-04:08:49 (GMT), [SCN-1001], 6078, SLOT 2 | FFDC | CHASSIS, CRITICAL, ED_DCX7_8B, SCN queue overflow for process 0.weblinker.fcg

RAS 記錄： 
2024/06/18-04:03:44:626847 (GMT), [C5-5668], 0, SLOT 2 | CHASSIS | PORT 3/40, ERROR, ED_DCX7_8B, S3,P40(73): Port Fault: Hard 0(2) fault1=100 fault2=5 (0x64 0x0 0x0), OID:0x43328809, SPOID:0x43368128, c
2024/05/24-10:23:16 (GMT), [MS-1009], 742, SLOT 2 | FID 128 | PORT 4/17, ERROR, BCC_CORE_SAN_05, RLIR event Slot/Port 4/17 (0x0C7100) Device Port Tag is 0x0333,Loss of Signal or Synchronization.

從 supportsave 套裝解壓縮的 diag.log 檔案包含需要檢查的嚴重錯誤。以下是dial.log的摘錄： 
2024/06/15-00:02:42:595136 (GMT), [C5-5668], 0, SLOT 2 | CHASSIS | PORT 11/40, ERROR, ED_DCX7_8B, S11,P616(73): Port Fault: Hard 0(2) fault1=100 fault2=5 (0x64 0x0 0x0), OID:0x43b28809, SPOID:0x43b68128, c5

Cause

從少數設備飄動會導致中斷，即 Weblinker 無法跟上由所有狀態更改引起的佇列。
Weblinker由於任何行為不端的設備而面臨挑戰。無論是飄動的 ISL 或連接埠故障，這類問題都需要檢閱 RAS 記錄是否有中斷事件。

Resolution

必須調查行為異常的連接埠 （擺動的 ISL 或連接埠故障）。

Affected Products

Brocade
Article Properties
Article Number: 000226593
Article Type: Solution
Last Modified: 21 Nov 2025
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.