PowerScale：Linux CEE 除錯和記錄收集

Summary: 如何在 Linux CEE 方塊上啟用通用事件啟用啟用 （CEE） 除錯。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

執行 Linux CEE 時，可以啟用偵錯模式，以收集更進階的資料以進行故障診斷，請按照以下步驟操作：

複製設定檔以允許簡單還原： 

#cp /opt/CEEPack/emc_cee_config.xml /opt/CEEPack/emc_cee_config.xml.bak

Edit the /opt/CEEPack/emc_cee_config.xml configuration file to set both debug and Verbose to 63.  

#vi /opt/CEEPack/emc_cee_config.xml

Under Configuration, find "Debug" and "Verbose" and change value to 63:

<Configuration>
    <CacheSize>100</CacheSize>
    <Debug>63</Debug>
    <HeartBeatIntervalSecs>10</HeartBeatIntervalSecs>
    <InstrIntervalSecs>60</InstrIntervalSecs>
    <NumberOfThreads>20</NumberOfThreads>
    <Verbose>63</Verbose>
    <HttpPort>12228</HttpPort>
    <DirDBPath></DirDBPath>
    <WatchDog>
      <RestartDelay>5</RestartDelay>
      <RestartCount>2</RestartCount>
      <ResetRestartCountAfter>86400</ResetRestartCountAfter>
    </WatchDog>
  </Configuration>
</CEEConfig>
Restart the CEE process: 


# /opt/CEEPack/emc_cee_svc restart
Shutting down EMC CEE Service:                             [  OK  ]
Starting EMC CEE Service: emc_cee.exe (pid 18902 18899) is running...

Debug is now enabled.  Trigger some auditable events on the cluster or monitor for the error we are troubleshooting then revert back to original. 

To revert back to original config: 

First, I like to make a copy of the debug config for future use: 

#cp /opt/CEEPack/emc_cee_config.xml /opt/CEEPack/emc_cee_config.xml.debug

Then Copy the original backup back to the main config and restart CEE again

#cp /opt/CEEPack/emc_cee_config.xml.bak /opt/CEEPack/emc_cee_config.xml
#/opt/CEEPack/emc_cee_svc restart

We want to then gather the log file /opt/CEEPack/emc_cee_svc.log and have that sent in for review.  

 
 

Additional Information

有關 Linux 上的 CEE 組態和使用說明，請遵循隨附的 「Linux 上的常見事件啟用程式」 說明文件。

如果製作了以前製作的配置檔調試副本，並且原始配置仍然存在，則可以將調試檔複製到主配置並重新啟動服務（始終備份當前配置，如上所示）：

#cp /opt/CEEPack/emc_cee_config.xml.debug /opt/CEEPack/emc_cee_config.xml
#/opt/CEEPack/emc_cee_svc restart

Affected Products

PowerScale OneFS

Products

PowerScale OneFS
Article Properties
Article Number: 000009293
Article Type: How To
Last Modified: 20 Nov 2025
Version:  4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.