Dell Unity：初始驱动器配置的动态池最佳做法（用户可纠正）
Summary: 初始驱动器配置的动态池最佳做法
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
在创建时，动态池使用尽可能大的 RAID 宽度和指定的驱动器数量，最多可达到以下最大宽度：
-RAID-1/0：4+4-RAID-5
：12+1-RAID-6
：14+2
使用 Dynamic Pool 时， 较小的 RAID 宽度没有性能或可用性优势。因此，为了通过奇偶校验 RAID 最大限度地提高可用容量，建议最初创建具有足够驱动器的池，以保证可能的最大 RAID 宽度。
Additional Information
有关 Unity 一般最佳实践的更多指导，请参阅以下链接：
https://support.emc.com/docu69891_Dell-EMC-Unity:-Best-Practices-Guide.pdf?language=en_US
Affected Products
Dell EMC Unity FamilyProducts
Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity 550F, Dell EMC Unity 600F, Dell EMC Unity 650F, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity FamilyArticle Properties
Article Number: 000014378
Article Type: How To
Last Modified: 19 Mar 2025
Version: 5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.