Avamar:第 4S 代硬件:由于内存或电池问题,控制器高速缓存被丢弃

Summary: 本文讨论如何解决第 4S 代节点上的症状代码 52619 或 52624(由于内存或电池问题,控制器高速缓存已丢弃,事件 ID:10)。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

Avamar UI 中会显示以下错误:

<MRMON010> Controller ID: 0  Controller cache discarded due to memory/battery problems  Event ID:10

Cause

如果在电池备份单元 (BBU) 未充满电且强制启用回写模式的情况下突然断电或系统无响应,则会发生这种情况。

延长的系统功率损耗会导致 BBU 在电源恢复之前完全放电。 

Resolution

1.以“管理员”身份登录到 Avamar 实用程序节点。

2.提升到 root 权限。

3.按文章 Avamar 加载根密钥:如何登录到 Avamar Server 并加载各种密钥。

提醒:本文的其余部分假定已加载管理密钥。
 

4.使用 UI 事件或呼叫总部服务请求中的信息:

一个。确定生成错误消息的节点。

b.使用以下命令以 root 用户身份连接到节点:

ssn 0.# --user=root

(其中 0.# 是物理节点编号)

5.在受影响的节点上:

一个。查看 /var/log/messages 文件以确认错误并验证错误消息之前发生的情况。

b.检查环境中是否存在任何问题,如断电。

c. 检查电池的当前状态:

 CmdTool2 -AdpBbuCmd -GetBbuStatus -a0

有关完整的输出示例,请参阅附录 A。

d. 查看电池状态。

如果电池处于故障状态,请联系 Dell Technologies 技术支持 部门,以使用磁盘移植过程更换节点。

如果电池未处于故障状态,请在电池上强制执行记忆周期,以确保其正常工作:  

CmdTool2 -AdpBbuCmd -BbuLearn -a0


如果问题仍然存在,请联系 Dell Technologies 技术支持部门以获得进一步的帮助。

Additional Information

附录 A:

良好电池的输出示例:

CmdTool2 -AdpBbuCmd -GetBbuStatus -a0
BBU status for Adapter: 0
 
BatteryType: SuperCaP
Voltage: 9484 mV
Current: 0 mA
Temperature: 32 C
 
BBU Firmware Status:
 
  Charging Status              : None
  Voltage                                 : OK
  Temperature                             : OK
  Learn Cycle Requested                   : No
  Learn Cycle Active                      : No
  Learn Cycle Status                      : OK
  Learn Cycle Timeout                     : No
  I2c Errors Detected                     : No
  Battery Pack Missing                    : No
  Battery Replacement required            : No
  Remaining Capacity Low                  : No
  Periodic Learn Required                 : No
  Transparent Learn                       : No
  No space to cache offload               : No
  Pack is about to fail & should be replaced : No
  Cache Offload premium feature required  : No
  Module microcode update required        : No
 
GasGuageStatus:
  Fully Discharged        : Yes
  Fully Charged           : No
  Discharging             : Yes
  Initialized             : No
  Remaining Time Alarm    : No
  Remaining Capacity Alarm: No
  Discharge Terminated    : No
  Over Temperature        : No
  Charging Terminated     : Yes
  Over Charged            : No
 
  Pack energy             : 94 J
  Capacitance             : 100
  Remaining reserve space : 156
 
 
Exit Code: 0x00

Affected Products

Avamar, Avamar Server
Article Properties
Article Number: 000039422
Article Type: Solution
Last Modified: 14 Nov 2025
Version:  9
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.