VNX Symptoom Code : 802 - data mover panic rwInode: write bad inode (op te lossen door Dell EMC)

Summary: Paniek datamover en bestandssysteem ontkoppeld en als beschadigd gemarkeerd

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

Geen: Panic data mover tijdens normale werking.

Er is een noodgeval opgetreden bij de datamover en nadat de datamover niet in stand-by is gezet of opnieuw is opgestart in het geval dat er geen stand-by beschikbaar is, wordt één bestandssysteem ontkoppeld en als beschadigd gemarkeerd.

Korte beschrijving: Slot X has panicked - post panic logging complete: rwInode: write bad inode. Dumpinformatie is te vinden in
/nas/log/post_panic_info_date_time_slot_x.log.


DART-paniek-/storingsmelding: 

    rwInode: write bad inode

Panicking Processor:
2 DART-stacktrace:
   0x3a7d310: 0x13dba4 handle_panic+0xb
0x4162b000: 0x8465ed _ZN8inoCache7rwInodeEjP6dinodeiP11UFS_LogHold+
0x4162b050: 0x866d7e _ZN9UFS_Vnode16finishInodeWriteEPvS0_+0x212
0x4162b090:
0x930a52 _ZN20UFS_UpdateDescriptor8completeE11File_Stat 0x4162b200: 0x877315 _ZN9UFS_Vnode9setLengthEyiiiP13Buffer_Cached+0
0x4162b280:
0x1401a37 _ZN10DHSM_Vnode9setLengthEyiiiP13Buffer_Cache 0x4162b320:
0x79781f _ZN9File_Fork8truncateEyR14lockCredentialPK11s 0x4162b380:



0x7a518d _ZN13File_OpenFile8truncateEyPK11sockAddressiP Jul 27 07:03:10 2018:CS_PLATFORM:BoxMonitor:CRITICAL:302:::::Slot X is in paniek geraakt.
Jul 27 07:03:18 2018:CS_PLATFORM:BoxMonitor:DEBUG:905:::::Slot X recover_slot /nas 2 has started.
Jul 27 07:03:41 2018:DART:UFS:WARNING:7:Slot X:::1532671409:File system <FSID> is corrupted and will unmounted.
Jul 27 07:03:41 2018:DART:UFS:WARNING:48:Slot X:::1532671409:De FSID-koppeling> van het bestandssysteem <is mislukt tijdens failover omdat het bestandssysteem beschadigd was.



Cause

Het probleem doet zich voor als gevolg van een misrekening bij het afkappen van een bestand, waardoor een negatieve waarde wordt berekend voor het aantal blokken. Dit zou als een zeldzaam probleem worden beschouwd, omdat het zich alleen voordoet onder een zeer specifieke reeks omstandigheden.

Resolution

Upgrade naar VNX OE releaseversie 7.1.83.2 en installeer hotfix. Het buildnummer van de hotfix is 7.1.83.202.

Affected Products

VNX VG8

Products

VNX VG8
Article Properties
Article Number: 000054945
Article Type: Solution
Last Modified: 07 Nov 2025
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.