Avamar: O checkpoint apresentou falha com o resultado "MSG_ERR_BADTIMESYNC".

O checkpoint apresentou falha com o resultado "MSG_ERR_BADTIMESYNC".

avmaint cpstatus mostra o seguinte erro:
 

Every 2.0s: avmaint cpstatus  20:16:23 2022

mapall --parallel 'date' mostra um nó fora de sincronia:
 

admin@utility:~/>: mapall --parallel 'date'
Using /usr/local/avamar/var/probe.xml
(0.0) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.2 'date'
(0.1) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.3 'date'
(0.2) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.4 'date'
(0.3) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.5 'date'
(0.4) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.6 'date'
(0.7) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.9 'date'
(0.6) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.8 'date'
(0.5) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.7 'date'
Fri Sep 23 13:05:21 UTC 2022
Fri Sep 23 13:05:21 UTC 2022
Fri Sep 23 13:07:17 UTC 2022 

Verificar ntp with ntpq -pn mostra a conexão recusada no nó suspeito.
Resultado editado para mostrar apenas o nó afetado:
 

admin@utility:~/>: mapall --noerror '/usr/sbin/ntpq -pn'
Using /usr/local/avamar/var/probe.xml

(0.3) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.5 '/usr/sbin/ntpq -pn'
/usr/sbin/ntpq: read: Connection refused

Ao verificar o status diretamente no nó afetado, vemos que ntpd está ativo: ativando (reinicialização automática) (resultado: recursos):
 

root@node03:~/>: systemctl status ntpd
● ntpd.service - NTP Server Daemon
   Loaded: loaded (/usr/lib/systemd/system/ntpd.service; enabled; vendor preset: disabled)
  Drop-In: /run/systemd/generator/ntpd.service.d
           └─50-insserv.conf-$time.conf
   Active: activating (auto-restart) (Result: resources) since Fri 2022-09-23 13:22:35 UTC; 1min 58s ago

No entanto, o status deve refletir Ativo: ativo (em execução):
 

root@node03:~/#: systemctl status ntpd
● ntpd.service - NTP Server Daemon
   Loaded: loaded (/usr/lib/systemd/system/ntpd.service; enabled; vendor preset: disabled)
  Drop-In: /run/systemd/generator/ntpd.service.d
           └─50-insserv.conf-$time.conf
   Active: active (running) since Fri 2022-09-23 14:04:37 UTC; 26s ago

Falha na tentativa de iniciar o ntpd:
 

root@node03:~/#: systemctl start ntpd.service
Job for ntpd.service failed because a configured resource limit was exceeded. See "systemctl status ntpd.service" and "journalctl -xe" for details.

Durante a análise do journalctl -xe, as mensagens "No space left on the device" são exibidas.

df mostra que /var está em 100%:
 

admin@node03:~/#: df -kh
Filesystem      Size  Used Avail Use% Mounted on
devtmpfs         16G  8.0K   16G   1% /dev
tmpfs            16G     0   16G   0% /dev/shm
tmpfs            16G   50M   16G   1% /run
tmpfs            16G     0   16G   0% /sys/fs/cgroup
/dev/sda5       9.8G  2.4G  7.0G  26% /
/dev/sdg1       183G  8.3G  165G   5% /ssd01
/dev/sda1       979M   50M  878M   6% /boot
/dev/sdd1       1.9T  236G  1.6T  13% /data04
/dev/sdc1       1.9T  240G  1.6T  13% /data03
/dev/sde1       1.9T  236G  1.6T  13% /data05
/dev/sdf1       1.9T  238G  1.6T  13% /data06
/dev/sdb1       1.9T  238G  1.6T  13% /data02
/dev/sda7       2.0G  2.0G     0 100% /var 


 

O ntpd depende de /var/lib/ntp/drift/ntp.drift, que contém a estimativa mais recente do erro de frequência do relógio. Se /var estiver em 100%, o ntpd não poderá atualizar ou criar o arquivo ntp.drift e o ntp não funcionará corretamente.

No nó afetado, investigue e resolva o uso de 100% em /var. Depois de corrigido, reinicie o ntpd:
 

root@node03:~/#: systemctl restart ntpd

 
Verifique o status de ntpd:
 

root@node03:~/#: systemctl status ntpd

Resultados semelhantes aos seguintes devem ser observados:
 

root@node03:~/#: systemctl status ntpd
● ntpd.service - NTP Server Daemon
   Loaded: loaded (/usr/lib/systemd/system/ntpd.service; enabled; vendor preset: disabled)
   Active: active (running) since Tue 2022-09-27 21:21:42 UTC; 37s ago
     Docs: man:ntpd(1)
  Process: 29442 ExecStart=/usr/sbin/start-ntpd start (code=exited, status=0/SUCCESS)
 Main PID: 29463 (ntpd)
    Tasks: 2
   CGroup: /system.slice/ntpd.service
           ├─29463 /usr/sbin/ntpd -p /var/run/ntp/ntpd.pid -g -u ntp:ntp -c /etc/ntp.conf
           └─29464 ntpd: asynchronous dns resolver

Sep 27 21:21:42 node03 ntpd[29463]: Listen normally on 3 bond0 10.241.169.52:123
Sep 27 21:21:42 node03 ntpd[29463]: Listen normally on 4 bond1 192.168.255.22:123
Sep 27 21:21:42 node03 ntpd[29463]: Listen normally on 5 lo [::1]:123
Sep 27 21:21:42 node03 ntpd[29463]: Listen normally on 6 bond0 [fe80::260:16ff:feaa:2a10%11]:123
Sep 27 21:21:42 node03 ntpd[29463]: Listen normally on 7 bond1 [fe80::260:16ff:fea9:b182%12]:123
Sep 27 21:21:42 node03 ntpd[29463]: Listening on routing socket on fd #24 for interface updates
Sep 27 21:21:42 node03 start-ntpd[29442]: Starting network time protocol daemon (NTPD)
Sep 27 21:21:42 node03 systemd[1]: Started NTP Server Daemon.

Verifique o ntp com ntpq:
 

root@node03:~/#: /usr/sbin/ntpq -pn

Resultados semelhantes aos seguintes devem ser observados:
 

root@node03:~/#: /usr/sbin/ntpq -pn
     remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
*10.241.216.209  10.233.131.242   2 u  966 1024  377    0.558    1.559   0.600
+192.168.255.21  10.241.216.209   3 u  401 1024  377    0.152    0.521   0.420

Teste a resolução executando um checkpoint manual a partir do nó utility.