Avamar：检查点失败，结果为“MSG_ERR_BADTIMESYNC”。

Summary: 检查点失败，结果为“MSG_ERR_BADTIMESYNC”。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

检查点失败，结果为“MSG_ERR_BADTIMESYNC”。



avmaint cpstatus 显示以下错误：
  
Every 2.0s: avmaint cpstatus  20:16:23 2022

mapall --parallel “date” 显示节点不同步：
  
admin@utility:~/>: mapall --parallel 'date'
Using /usr/local/avamar/var/probe.xml
(0.0) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.2 'date'
(0.1) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.3 'date'
(0.2) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.4 'date'
(0.3) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.5 'date'
(0.4) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.6 'date'
(0.7) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.9 'date'
(0.6) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.8 'date'
(0.5) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.7 'date'
Fri Sep 23 13:05:21 UTC 2022
Fri Sep 23 13:05:21 UTC 2022
Fri Sep 23 13:07:17 UTC 2022 

使用 ntpq -pn 验证 ntp 在可疑节点上显示连接被拒绝。
编辑输出以仅显示受影响的节点：
 

admin@utility:~/>: mapall --noerror '/usr/sbin/ntpq -pn'
Using /usr/local/avamar/var/probe.xml

(0.3) ssh -q  -x  -o GSSAPIAuthentication=no admin@192.168.255.5 '/usr/sbin/ntpq -pn'
/usr/sbin/ntpq: read: Connection refused

当直接在受影响的节点上验证状态时，我们看到 ntpd 处于活动状态：激活（自动重新启动）（结果：资源）：
  
root@node03:~/>: systemctl status ntpd
● ntpd.service - NTP Server Daemon
   Loaded: loaded (/usr/lib/systemd/system/ntpd.service; enabled; vendor preset: disabled)
  Drop-In: /run/systemd/generator/ntpd.service.d
           └─50-insserv.conf-$time.conf
   Active: activating (auto-restart) (Result: resources) since Fri 2022-09-23 13:22:35 UTC; 1min 58s ago

但是，状态应反映活动：活动（正在运行）：
  
root@node03:~/#: systemctl status ntpd
● ntpd.service - NTP Server Daemon
   Loaded: loaded (/usr/lib/systemd/system/ntpd.service; enabled; vendor preset: disabled)
  Drop-In: /run/systemd/generator/ntpd.service.d
           └─50-insserv.conf-$time.conf
   Active: active (running) since Fri 2022-09-23 14:04:37 UTC; 26s ago

尝试启动 ntpd 失败：
  
root@node03:~/#: systemctl start ntpd.service
Job for ntpd.service failed because a configured resource limit was exceeded. See "systemctl status ntpd.service" and "journalctl -xe" for details.

在查看 journalctl -xe 期间，会看到“No space left on the device”消息。

df 显示 /var 为 100%：
  
admin@node03:~/#: df -kh
Filesystem      Size  Used Avail Use% Mounted on
devtmpfs         16G  8.0K   16G   1% /dev
tmpfs            16G     0   16G   0% /dev/shm
tmpfs            16G   50M   16G   1% /run
tmpfs            16G     0   16G   0% /sys/fs/cgroup
/dev/sda5       9.8G  2.4G  7.0G  26% /
/dev/sdg1       183G  8.3G  165G   5% /ssd01
/dev/sda1       979M   50M  878M   6% /boot
/dev/sdd1       1.9T  236G  1.6T  13% /data04
/dev/sdc1       1.9T  240G  1.6T  13% /data03
/dev/sde1       1.9T  236G  1.6T  13% /data05
/dev/sdf1       1.9T  238G  1.6T  13% /data06
/dev/sdb1       1.9T  238G  1.6T  13% /data02
/dev/sda7       2.0G  2.0G     0 100% /var 


 

Cause

/var/lib/ntp/drift/ntp.drift 上的 ntpd reliies，其中包含时钟频率错误的最新估计值。如果 /var 为 100%，则 ntpd 无法更新或创建 ntp.drift 文件，ntp 将无法正常工作。

Resolution

在受影响的节点上，调查并解决 /var 上 100% 的使用情况。更正后，重新启动 ntpd：
  
root@node03:~/#: systemctl restart ntpd
 
提醒：成功重新启动不会生成任何输出。

检查 ntpd 的状态：
  
root@node03:~/#: systemctl status ntpd

应观察到类似于以下内容的结果：
  
root@node03:~/#: systemctl status ntpd
● ntpd.service - NTP Server Daemon
   Loaded: loaded (/usr/lib/systemd/system/ntpd.service; enabled; vendor preset: disabled)
   Active: active (running) since Tue 2022-09-27 21:21:42 UTC; 37s ago
     Docs: man:ntpd(1)
  Process: 29442 ExecStart=/usr/sbin/start-ntpd start (code=exited, status=0/SUCCESS)
 Main PID: 29463 (ntpd)
    Tasks: 2
   CGroup: /system.slice/ntpd.service
           ├─29463 /usr/sbin/ntpd -p /var/run/ntp/ntpd.pid -g -u ntp:ntp -c /etc/ntp.conf
           └─29464 ntpd: asynchronous dns resolver

Sep 27 21:21:42 node03 ntpd[29463]: Listen normally on 3 bond0 10.241.169.52:123
Sep 27 21:21:42 node03 ntpd[29463]: Listen normally on 4 bond1 192.168.255.22:123
Sep 27 21:21:42 node03 ntpd[29463]: Listen normally on 5 lo [::1]:123
Sep 27 21:21:42 node03 ntpd[29463]: Listen normally on 6 bond0 [fe80::260:16ff:feaa:2a10%11]:123
Sep 27 21:21:42 node03 ntpd[29463]: Listen normally on 7 bond1 [fe80::260:16ff:fea9:b182%12]:123
Sep 27 21:21:42 node03 ntpd[29463]: Listening on routing socket on fd #24 for interface updates
Sep 27 21:21:42 node03 start-ntpd[29442]: Starting network time protocol daemon (NTPD)
Sep 27 21:21:42 node03 systemd[1]: Started NTP Server Daemon.

使用 ntpq 验证 ntp：
  
root@node03:~/#: /usr/sbin/ntpq -pn

应观察到类似于以下内容的结果：
  
root@node03:~/#: /usr/sbin/ntpq -pn
     remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
*10.241.216.209  10.233.131.242   2 u  966 1024  377    0.558    1.559   0.600
+192.168.255.21  10.241.216.209   3 u  401 1024  377    0.152    0.521   0.420

通过从应用工具节点运行手动检查点来测试分辨率。

Affected Products

Avamar, Avamar Data Store, Avamar Data Store Gen3, Avamar Data Store Gen4, Avamar Data Store Gen4S, Avamar Data Store Gen4T, Avamar Data Store Gen5A, Avamar Server, Avamar Virtual Edition
Article Properties
Article Number: 000203791
Article Type: Solution
Last Modified: 18 Jul 2023
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.