Please select a product to check article relevancy
This article applies to This article does not apply toThis article is not tied to any specific product.Not all product versions are identified in this article.
但是,如果磁碟群組中的硬碟已更換為較大的磁碟,則可用空間會顯示在 WithArrExp 在 ”PERCCLI /cx/vx show expansion.“
圖 6:PERCCLI 產量 WithArrExp
Cause
PERC HII 設定公用程式和 iDRAC 不支援擴充陣列容量。
Resolution
使用 Dell 擴充陣列容量 PERCCLI 公用程式:
1. Run "perccli /cx/vx show expansion" to determine the available expansion space.
2. Then run "perccli /cx/vx expand Size=<xx> expandarray" to perform the array expansion.
The expand command will expand the virtual drive within the existing array if there is available space, or expand into additional capacity if the drives have been replaced with larger ones.
The <xx> size value is specified in GB.
If the "expandarray" option is specified, the full array capacity will be expanded.
If this option is not specified, only the virtual drive capacity will be expanded rather than the full array.