Data Domain:添加新存储模块后,DD6400 无法正确扩展文件系统。

Summary: DD6400 安装有 7.7.2 或 7.7.9。在使用机头单元或机头单元和一个机柜创建文件系统时,随后添加任何剩余的机柜时,文件系统扩展不会扩展到其最大容量。如果添加了机柜中的所有可用存储,并且从初始部署创建了文件系统,则容量扩展没有问题。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.

Symptoms

新盘架将添加到系统中。
运行“filesys expand”后,文件系统大小不正确。

Cause

此行为是由于物理扩展区管理器 (PEM) 的问题造成的。
在创建 FS 后添加机柜时,PEM 模块无法识别要在新添加的机柜上创建的下一个 RAID 阵列编号。最终仅扩展现有阵列。它不会创建新的 RAID 阵列来满足容量要求。

示例:
在下面的示例中,运行文件系统扩展后,活动层大小应增加到 94.5 TiB。但是,在运行 命令后,新 FS 大小为 56.6 TiB。
1) HU 上的 FS 扩展和 1 个 ES40
 
Capacity licenses:
Feature Shelf Model Capacity Type State Expiration Date Note
------------------ --------------- ---------- --------------- ------ -----------
1 CAPACITY-ACTIVE PROTECTION_POOL 94.58 TiB permanent (int) active n/a
2 CLOUDTIER-CAPACITY n/a 181.89 TiB permanent (int) active n/a
------------------ --------------- ---------- --------------- ------ -----------
!!!! localhost YOUR DATA IS IN DANGER !!!! # ddsh -s disk show state
Tue May 3 18:07:46 PDT 2022
Enclosure Disk
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
--------- ----------------------------------------------
1 . . . . . . . . . . . .
2 v v v v v v v v v v v v v v v
--------- ----------------------------------------------
Legend State Count
------ --------------- -----
. In Use Disks 12
v Available Disks 15
------ --------------- -----
Total 27 disks
!!!! localhost YOUR DATA IS IN DANGER !!!! # ddsh -s filesys expand

!!!! localhost YOUR DATA IS IN DANGER !!!! ddsh -s disk show state; ddsh -s filesys show space; ddsh -s storage show all

Enclosure Disk
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
--------- ----------------------------------------------
1 . . . . . . . . . . . .
2 . . . . . . . . . . . . . . .
--------- ----------------------------------------------
Legend State Count
------ ------------ -----
. In Use Disks 27
------ ------------ -----
Total 27 disks
Active Tier:
Resource Size GiB Used GiB Avail GiB Use% Cleanable GiB
---------------- -------- -------- --------- ---- -------------
/data: pre-comp - 0.0 - - -
/data: post-comp 56911.7 0.1 56911.7 0% 0.0
/ddvar 78.6 4.6 70.0 6% -
/ddvar/core 251.9 0.1 239.0 0% -
---------------- -------- -------- --------- ---- -------------
The Active tier can be expanded by 37.92 TiB.
Active tier details:
Current active tier size: 56.6 TiB
Storage available to the active tier: 39.2 TiB
Active tier maximum capacity: 156.4 TiB
Cache tier details:
Current cache tier size: 3.2 TiB
Storage available to the cache tier: 0.0 TiB
Cloud tier details:
Current cloud tier metadata size: 21.7 TiB
Storage available to the cloud tier: 0.0 TiB
Shelf Capacity License:
License Model Total Used Remaining
--------------- --------------- -------- -------- ---------
CAPACITY-ACTIVE PROTECTION_POOL 94.5 TiB 56.3 TiB 38.1 TiB
--------------- --------------- -------- -------- ---------
The active tier size may be slightly larger than the licensed amount.


Resolution

解决方案:
此问题已在 DDOS 7.7.3.0-1010549DDOS-7.10.0.0 和更高版本中得到修复。
修复将更正代码错误,并正确标识要在新添加的存储模块驱动器上创建的下一个 RAID 阵列编号。

解决 方案:
如果您计划进行扩展,请升级到固定版本,然后运行 expand 。
如果您执行部分扩展并升级到固定版本,下一次 FS 扩展将自动纠正扩展大小。

Affected Products

Data Protection, Data Domain, DD6400 Appliance
Article Properties
Article Number: 000210965
Article Type: Solution
Last Modified: 17 May 2026
Version:  7
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.