Secure Connect Gateway Appliance (Virtual Edition) for VMware and Hyper-V: How to Reboot the Secure Connect Gateway Containers

Summary: Secure connect gateway version run on two docker containers "Esrsde-app" and "Saede-app." "Esrsde-app" container is responsible for the connectivity of the SCG, while the "Saede-app" is responsible for the user interface of the SCG. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Before proceeding with any action, please take a snapshot of the SCG first. 

The are two options to reboot the SCG containers:
  1. The first option is to reboot the SCG containers only.
    1. Access the CLI of the SCG thought console or a putty session.
    2. Type the following command in the CLI to make sure that the docker containers are running: # docker ps# docker ps result
 
    1. Then type the following commands in the screenshot below:
Commands to be executed
  1. Containers rebooting is done. Wait for 5 minutes for the containers to be fully functional again.


  
 
  1. The second option is to reboot the SCG VM itself which would also result in rebooting all SCG services including the containers.
    1. Access the CLI of the SCG thought console or a putty session.
    2. Type the following command to reboot the SCG VM: # reboot
    3. SCG VM takes about 5 - 10 minutes to fully reboot depending on your environment.
 
 
Article Properties
Article Number: 000214500
Article Type: How To
Last Modified: 16 Jul 2024
Version:  3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.