Avamar ADS Gen5: 이벤트 코드=52804 메모리 장치 오류가 발생했습니다.
Summary: 이벤트 코드=52804, 메모리 장치 오류가 발생했습니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
다음과 유사한 메시지가 MCCLI 이벤트 쇼, AUI(Avamar User Interface) 이벤트 페이지 또는 /var/log/messages에 표시될 수 있습니다.
EventID: 52804 A memory device error occurred. The system may continue to function as normal (except for a multibit error). Replace the memory module identified in the message during the system's next scheduled maintenance. Clear the memory error on multibit ECC error. The memory device status and location are provided
Cause
예측된 DIMM 장애
Resolution
영향을 받는 노드에 로그인하고 다음 명령을 실행합니다.
Omreport chassis memory
다음과 유사한 장애가 발생한 메모리 슬롯이 반환될 수 있습니다.
Index : 3 Status : Critical Connector Name : A4 Type : DDR4 - Synchronous Registered (Buffered) Size : 16384 MB
일반 메모리 슬롯의 출력 예:
Index : 6 Status : Ok Connector Name : B1 Type : DDR4 - Synchronous Registered (Buffered) Size : 16384 MB
비어 있는 메모리 슬롯에는 여전히 커넥터 이름이 있습니다. 비어 있는 메모리 슬롯에 대한 출력 예:
Index : Status : Unknown Connector Name : A7 Type : [Not Occupied] Size :
이 증상 코드를 구성하는 몇 가지 오류 코드가 있습니다. 대부분은 조치가 필요하지 않습니다. 다음 이벤트 코드에 조치가 필요합니다.
오류 코드는 Event Code, MessageID 또는 Code로 지정할 수 있습니다.
| 오류 코드 | 설명 | 권장 조치 |
| MEM0001 | arg1 위치에 있는 메모리 디바이스에서 다중 비트 메모리 오류가 감지됩니다. | DIMM을 즉시 교체하십시오. |
| MEM0702 | 시스템이 메모리 오류를 감지하고 수정했습니다. | 메모리 자가 복구가 수행될 수 있도록 시스템을 재부팅합니다. |
| MEM9072 | 시스템 메모리의 arg1 위치에 있는 메모리 디바이스의 비실행 경로에 수정할 수 없는 다중 비트 메모리 오류가 있습니다. | DIMM을 즉시 교체합니다. |
MEM0702 |
"Correctable memory error rate exceeded for DIMM_XX." |
DIMM을 즉시 교체합니다. |
위의 권장 조치가 DIMM을 교체하는 것이라면 커넥터 이름을 사용하여 어느 슬롯을 교체해야 하는지 지정합니다. Gen4t의 경우처럼 여러 슬롯을 교체할 필요가 없습니다.
Affected Products
Avamar Data Store Gen5AArticle Properties
Article Number: 000214852
Article Type: Solution
Last Modified: 30 Jun 2025
Version: 5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.