Dell Networking: OS6 RADIUS servers through the specified VRF

Summary: The "radius server vrf RADIUS-VRF" command has been introduced in Firmware Version 6.8.0.x release for the N3200-ON switches.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Table of Contents

  1. Summary
  2. Products Affected
  3. Command line
  4. Resolution

 

Summary
The "radius server vrf RADIUS-VRF" command has been introduced in Firmware Version 6.8.0.x release for the N3200-ON switches.

 

Products Affected
N3200/N2200

 

Command line
radius server vrf vrf-name
no radius server vrf

 

Cause

N/A

Resolution

When the VRF name is configured globally, the RADIUS client communicates with RADIUS servers through the specified VRF.
image.png

 

Additional Information

Dell-Networking-N-Series-Switches-User-Guide-version-6.8.0

Dell-Networking-N-Series-Switches-CLI-Reference-Guide-version-6.8.0

Videos

N/A

Affected Products

Dell EMC Networking N3200-ON
Article Properties
Article Number: 000216317
Article Type: Solution
Last Modified: 03 Oct 2023
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.