Dell Unity：无法创建链路聚合，错误代码：0x6000dfc
Summary: 尝试配置 LACP 会导致错误：Failed: 系统无法更改链路聚合设置。这可能是由于内存碎片所致。考虑重新启动相关 SP。（错误代码：0x6000dfc）
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
尝试配置 LACP 会导致错误：
Failed: The system was unable to change the link aggregation settings. This may have occurred because of memory fragmentation. Consider rebooting the relevant SP. (Error Code:0x6000dfc)
Cause
此错误的一个原因是必须删除剩余的命名空间。
Resolution
在 戴尔支持 网站上创建服务请求并引用此知识库文章。
Affected Products
Dell EMC UnityArticle Properties
Article Number: 000224503
Article Type: Solution
Last Modified: 15 May 2024
Version: 1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.