Connectrix SANnav: De switch is niet bereikbaar of heeft problemen met het maken van verbinding via HTTP's
Summary: Kan Fabric FOS 9.2.1a niet toevoegen aan SANnav 2.3.0.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Switchconfiguratie mislukt:
Failed to configure the switch. The Switch is either not reachable or having problem in connecting over HTTP(s).Detectie mislukt met de fout:
Discovery failed. Seed switch is either not reachable or having problem in connecting over HTTP(s)
Cause
SANnav 2.3.0 is niet getest met switches met FOS 9.2.1x.
Resolution
Upgrade de SANnav-versie naar 2.3.1a die is getest op code 9.2.1a en ontdek vervolgens de switches opnieuw.
Additional Information
Hieronder vindt u de releaseopmerkingen van Broadcom (zie het gedeelte Hardwareplatforms en FOS-supportmatrix):
Article Properties
Article Number: 000228259
Article Type: Solution
Last Modified: 21 Nov 2025
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.