Connectrix SANnav: O switch não está acessível ou está com problemas de conexão por HTTPs
Summary: Não é possível adicionar o Fabric FOS 9.2.1a ao SANnav 2.3.0.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Falha na configuração do switch:
Failed to configure the switch. The Switch is either not reachable or having problem in connecting over HTTP(s).Falha na descoberta com o erro:
Discovery failed. Seed switch is either not reachable or having problem in connecting over HTTP(s)
Cause
O SANnav 2.3.0 não é testado com switches que executam o FOS 9.2.1x.
Resolution
Faça upgrade da versão do SANnav para a versão 2.3.1a, que é testada para o código 9.2.1a, e depois detecte novamente os switches.
Additional Information
Abaixo estão as notas da versão da Broadcom (consulte a seção Plataformas de hardware e matriz de suporte do FOS):
Article Properties
Article Number: 000228259
Article Type: Solution
Last Modified: 21 Nov 2025
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.