Connectrix SANnav. Коммутатор недоступен или испытывает проблемы с подключением по HTTPs
Summary: Не удается добавить Fabric FOS 9.2.1a в SANnav 2.3.0.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Сбой конфигурации коммутатора:
Failed to configure the switch. The Switch is either not reachable or having problem in connecting over HTTP(s).Сбой обнаружения с ошибкой:
Discovery failed. Seed switch is either not reachable or having problem in connecting over HTTP(s)
Cause
SANnav 2.3.0 не тестируется с коммутаторами, работающими под управлением FOS 9.2.1x.
Resolution
Обновите SANnav до версии 2.3.1a, которая протестирована для кода 9.2.1a, а затем повторно определите коммутаторы.
Additional Information
Ниже приведены примечания к выпуску Broadcom (см. раздел «Аппаратные платформы и таблица поддержки FOS»).
Article Properties
Article Number: 000228259
Article Type: Solution
Last Modified: 21 Nov 2025
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.