Connectrix SANnav: Switchen kan inte nås eller har problem med att ansluta via HTTPs
Summary: Det går inte att lägga till Fabric FOS 9.2.1a till SANnav 2.3.0.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Det gick inte att konfigurera switchen:
Failed to configure the switch. The Switch is either not reachable or having problem in connecting over HTTP(s).Identifieringen misslyckades med felet:
Discovery failed. Seed switch is either not reachable or having problem in connecting over HTTP(s)
Cause
SANnav 2.3.0 har inte testats med switchar som körs med FOS 9.2.1x.
Resolution
Uppgradera SANnav-versionen till 2.3.1a, som testas för kod 9.2.1a, och upptäck sedan switcharna på nytt.
Additional Information
Nedan finns versionskommentarer för Broadcom (se avsnittet Hårdvaruplattformar och FOS-stödmatris):
Article Properties
Article Number: 000228259
Article Type: Solution
Last Modified: 21 Nov 2025
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.