Connectrix SANnav：交换机无法访问或通过 HTTP 连接时出现问题
Summary: 无法将结构 FOS 9.2.1a 添加到 SANnav 2.3.0。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
交换机配置失败：
Failed to configure the switch. The Switch is either not reachable or having problem in connecting over HTTP(s).发现失败，并显示错误：
Discovery failed. Seed switch is either not reachable or having problem in connecting over HTTP(s)
Cause
SANnav 2.3.0 未在运行 FOS 9.2.1x 的交换机上进行测试。
Resolution
将 SANnav 版本升级到 2.3.1a（ 已经过代码 9.2.1a 测试），然后重新发现交换机。
Additional Information
以下是 Broadcom 发行说明（请参阅“硬件平台和 FOS 支持矩阵”部分）：
Article Properties
Article Number: 000228259
Article Type: Solution
Last Modified: 21 Nov 2025
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.