Cloudlink How to Send a test SNMP trap in the CloudLink Center

Summary: Test your SNMP configuration to ensure that the target receives SNMP traps from the CloudLink Center.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Send a test SNMP trap in the CloudLink Center

Test your SNMP configuration to ensure that the target receives SNMP traps from the CloudLink Center.

Following traps are sent from CloudLink Center:
  • alarmUpTrap when a new alarm is raised on the CloudLink Center server.
  • alarmDownTrap when the cause of the alarm is corrected or removed.

The information about the CloudLink alarm is contained in the alarmUpTrap, and the alarm identifier is contained in the alarmDownTrap.

You can use the clAlarmId for unique value for each alarm instance to track the raising and lowering of a specific alarm on the CloudLink Center server.

Steps

  1. Log in to CloudLink Center.
  2. Select Server > SNMP > Send Test Trap.
  3. In the Confirm Sending Test SNMP Trap dialog box, when prompted to confirm the request, click Send.

Affected Products

CloudLink SecureVM, PowerFlex rack, ScaleIO
Article Properties
Article Number: 000273272
Article Type: How To
Last Modified: 16 Jan 2025
Version:  1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.