PowerFlex SDR How to Modify IP Address Role
Summary: Update the role of an IP address configured on the Storage Data Replicator (SDR).
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
The SDR communicates with several components, including: SDC (application), SDS (storage), and remote SDR (external) When an IP address is added to an SDR, the role, or roles of the IP address must be defined. The IP address role determines the component with which that IP address communicates. For example, the application role means that the associated IP address is used for SDR-SDC communication. The default setting is all roles.
Steps
- On the menu bar, click Protection > SDRs.
- In the list of SDRs, select the relevant SDR, and click Modify > Modify IP Role
- In the Modify IPs Role dialog box, select or clear the wanted roles for the IP address.
- Click Apply.
- Verify that the operation has finished and was successful, and click Dismiss.
Additional Information
Affected Products
PowerFlex rack, ScaleIOArticle Properties
Article Number: 000321706
Article Type: How To
Last Modified: 18 May 2025
Version: 1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.