PowerEdge: Solidigm PS1010 E1.S Drives LED behavior

Summary: Ejecting a Solidigm PS1010 E1.S drive with firmware G77YG102 or G77YG103 by Intelligent Platform Management Interface (IPMI) disables the green LED; this cosmetic effect is expected and does not impact performance. ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Solidigm PS1010 E1.S drives with firmware G77YG102 or G77YG103, the green LED is disabled when the drive is ejected using IPMI command. 

Cause

Solidigm PS1010 E1.S drives with firmware G77YG102 or G77YG103 are generic drives; as such, their green LED behavior does not match the LED behavior of Dell‑branded drives.

Resolution

The drive is working as designed. This behavior is expected and is cosmetic only and does not affect the drive performance. 

Affected Products

Dell Server 9712a, Dell Server 9712b, PowerEdge XE9712, Poweredge XE9712 with iDRAC, PowerEdge XE9780, PowerEdge XE9780L, PowerEdge XE9780LAP, PowerEdge XE9785, PowerEdge XE9785L
Article Properties
Article Number: 000442022
Article Type: Solution
Last Modified: 01 May 2026
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.