PowerFlex: Background_Scanner_Compare_Error reset_scanner_error_counters

Una captura SNMP se envía continuamente: MDM.Storage_Pool.Background_Scanner_Compare_Error El registro de PowerFlex del servidor de gateway muestra el siguiente streaming de mensajes:

2017-11-22 16:43:45,341 [threadPoolTaskScheduler-1] INFO  c.e.s3g.scaleio.web.SNMP.TrapSender - Sending V2 Trap: 
TRAP[requestID=0, errorStatus=Success(0), errorIndex=0, VBS[1.3.6.1.2.1.1.3.0 = 2 days, 7:15:00.00; 
1.3.6.1.6.3.1.1.4.1.0 = 1.3.6.1.4.1.1139.101.1; 1.3.6.1.4.1.1139.101.1.1 = 5; 1.3.6.1.4.1.1139.101.1.2 = 
MDM.Storage_Pool.Background_Scanner_Compare_Error; 1.3.6.1.4.1.1139.101.1.3 = a7fc3e7d00000XXX; 
1.3.6.1.4.1.1139.101.1.4 = SIO02.04.0000007]] to target: CommunityTarget[address=x.x.x.x/x, version=1, 
timeout=5000, retries=2, community=public]
 

Compruebe el registro de eventos de la MDM principal en busca de errores en el escáner de dispositivos: Por ejemplo:

"ERROR            Background device scanner on device ID xxxxxxxxxxxx reported compare error (Device Path:
 /dev/sdd, SDS: XXX (ID XXXXXXXXXXXXX), Peer Device Path: /dev/sdd (ID XXXXXXXXXXXX), Peer SDS: XXXXX 
(ID XXXXXXXXX), Volume name: XXXXXXX, Volume offset: 1385641 MB)"

La causa raíz se debe a que los contadores del escáner de dispositivos en segundo plano no se ponen a cero en el contador para detener los mensajes.

 reset_scanner_error_counters


Reset background device scanner error counters for the specified storage pool or device. You can use this command to reset
counters for comparison errors, read errors, or both counter types.


Syntax
scli --reset_scanner_error_counters ((((--protection_domain_id  | -- protection_domain_name ) --storage_pool_name ) |--storage_pool_id ) | (--device_id  | ((--sds_id  | --sds_name  | --sds_ip  [--sds_port ]) (--device_name  | --device_path ))) ) 

[--reset_compare_errors]
[--reset_read_errors]


Parameters

--protection_domain_id 
Protection domain ID
--protection_domain_name 
Protection domain name
--storage_pool_name 

--sds_id 
SDS ID
--sds_name 
SDS name
--sds_ip 
SDS IP address
--sds_port 
Port assigned to the SDS
--device_id 
Device ID
--device_name 
Device name
--device_path 
SDS storage device path or file path
--storage_pool_id 
Storage pool ID
--reset_read_errors
Reset the read error counter.
--reset_compare_errors
Reset the compare error counter.

Ejemplo

scli --reset_scanner_error_counters --protection_domain_name pd120 --storage_pool_name sp120 --sds_name sds13 --reset_compare_errors