Le damos la bienvenida
Le damos la bienvenida a Dell
Mi cuenta
- Realice pedidos rápida y fácilmente.
- Vea los pedidos y haga el seguimiento del estado del envío.
- Cree una lista de sus productos y acceda a ella
- Gestione sus sitios, productos y contactos a nivel de producto de Dell EMC con la administración de empresa.
Número de artículo: 000134472
MAC address pass through enabled on the Latitude 7400, but IPV4 options are not available in pre-boot menu
Resumen: Refer to the information to help resolve the situation where, the MAC address pass through is enabled on the Latitude 7400, but the IPV4 options are not available in the pre-boot menu.
Contenido del artículo
Síntomas
Refer to the information to help resolve the situation where, the MAC address pass through is enabled on the Latitude 7400, but the IPV4 options are not available in the pre-boot menu.
For information on about MAC address pass through, refer to Dell Knowledge Base article What is MAC Address pass through?
To help resolve the issue, perform the following steps.
- Reboot the computer.
- When you see the Dell logo during POST, press the F2 key to enter the setup screen.
Note: When the computer boots into Windows as normal, restart the process.
- Click System Configuration, to open the options.
- Click Thunderbolt™ Adapter Configuration.
- On the Thunderbolt™ Adapter Configuration page, click to check the box to the left of Enabled Thunderbolt Boot Support.
- Make sure User Authorization is selected in the options.
- Click Apply.
- Click Exit, confirm the changes when asked.
- The computer will restart.
Note: When the IPV4 options are still not available, repeat the steps, but select No Security instead of User Authorization.
Propiedades del artículo
Producto afectado
Latitude 7400
Fecha de la última publicación
10 abr 2021
Versión
4
Tipo de artículo
Solution