PowerStore: NMN mapping Fails after MNR from IPv4 to IPv6

Resumen: NMN (NAS Mobility Network / File Mobility Network) mapping failing with error "Cannot connect to the remote system with the IP Modify cluster IP of dpNetwork:{dpNetworkID} failed." after MNR (Network Management Reconfiguration) from IPv4 to IPv6. ...

Este artículo se aplica a: Este artículo no se aplica a: Este artículo no está vinculado a ningún producto específico. En este artículo no se identifican todas las versiones de los productos.

Síntomas

If MNR from IPv4 to IPv6 is done during an active replication session (having an unmapped File Mobility network for performing MNR), the newly created cannot be mapped on the File Mobility IPv6 Network. The following error is raised:
Cannot connect to the remote system with the IP 10.225.xxx.xxx. (0xE0801011104B) Modify cluster IP of dpNetwork: {dpNetworkID}

Causa

The problem occurs when creating and mapping the File Mobility Network, the SDNAS application does not support modification of File Mobility Network on the fly from IPv4 to IPv6.

Resolución

After the user has created (and failed to map) the IPv6 File Mobility Network, IPv6 MNR (they are in one subnet):
  1. Perform MNR back from IPv6 to IPv4
  2. Create and map File Mobility Network in IPv4
  3. Remove remote system and any objects that are related to it (Replication session, Protection Policy, Replication Rule, Snapshot Rule etc.)
  4. Unmap and delete File Mobility Network in IPv4
  5. Perform MNR from IPv4 to IPv6
  6. Create and map File Mobility Network in IPv6
  7. Create all removed objects in step 3 (Remote system, Protection Policy, Replication Rule, Snapshot Rule, Replication session).

Productos afectados

PowerStore
Propiedades del artículo
Número de artículo: 000202945
Tipo de artículo: Solution
Última modificación: 05 sept 2023
Versión:  3
Encuentra las respuestas que necesitas con la ayuda de otros usuarios de Dell
Servicios de asistencia
Comprueba si tu dispositivo está cubierto por los servicios de asistencia.