Passer au contenu principal
Quitter

Bienvenue dans l’univers Dell

Mon compte
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Créez et accédez à une liste de vos produits
  • Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.
Se connecter Créer un compte Connexion au compte Premier Connexion au programme de partenariat
Nous contacter

Numéro d’article: 000190151

Dell EMC Integrated Dell Remote Access Controller 9 (iDRAC9) Firmware Downgrade Failures RAC0181

Résumé: Dell EMC PowerEdge servers with the Integrated Dell Remote Access Controller 9 (iDRAC9) that shipped after June 1, 2021 may fail to downgrade iDRAC9 firmware with Informational event RAC0181 recorded in the Lifecycle Log. ...

Cet article a peut-être été traduit automatiquement. Si vous avez des commentaires concernant sa qualité, veuillez nous en informer en utilisant le formulaire au bas de cette page.

Contenu de l’article

Symptômes

Dell EMC PowerEdge servers with the Integrated Dell Remote Access Controller 9 (iDRAC9) that shipped with iDRAC9 firmware version 4.40.40.00 (or newer) require a two-step downgrade path to install older versions of iDRAC9 firmware. When attempting to downgrade the iDRAC9 firmware to firmware versions pre-February 2021, the firmware update will fail. In the Lifecycle Log, an Informational RAC0181 event will be recorded during iDRAC reboot.

Lifecyle Log RAC0181 example:

2021-07-29 13:04:38 65 SUP1901 Firmware update initializing.
2021-07-29 13:04:38 66 SUP1911 Firmware update initialization complete.
2021-07-29 13:04:38 67 SUP1904 Firmware update checksumming image.
2021-07-29 13:04:38 68 SUP1903 Firmware update verify image headers.
2021-07-29 13:04:49 69 SUP1905 Firmware update programming flash.
2021-07-29 13:05:23 70 SUP1906 Firmware update successful.
2021-07-29 13:08:20 72 RAC0182 The iDRAC firmware was rebooted with the following reason: user initiated.
2021-07-29 13:08:23 75 RAC0181 The iDRAC recovered from a firmware boot loader error with the following reason : Boot-time failover.

Repeated failed downgrade attempts will result in a SUP0517 error event to be recorded additionally in the Lifecycle Log.

Lifecycle Log SUP0517 example:

2021-07-30 03:36:12 315 SUP0517 Unable to update the Integrated Dell Remote Access Controller firmware to version 4.22.00.53 because the operation is not supported or the device is in a locked state.
 

This downgrade issue will be encountered under following common use case scenarios:

  • New server orders where deployment includes downgrading iDRAC9 firmware to older baseline.
  • System board replacements for warranty service calls.

 

Note: Lifecycle Controller automated 'PartFirmwareUpdate' feature will fail on system boards that are installed with iDRAC9 4.40.40.00 and try to downgrade to older iDRAC9 firmware versions.

Cause

Dell EMC PowerEdge 14th generation servers introduced a hardware root of trust security feature that requires firmware images to validate with certificate embedded into system board. Starting with iDRAC9 4.40.40.00, a new hardware certificate has to be validated in the firmware image in order to apply to iDRAC. Older iDRAC firmware images do not contain the latest hardware certificate image.

Résolution

In order to downgrade the iDRAC9 to pre-February 2021 firmware versions, the iDRAC will first require a downgrade to iDRAC9 firmware version 4.40.10.00. This firmware version will support the legacy hardware root of trust certificate and allow downgrades to earlier versions.

Propriétés de l’article

Produit concerné

iDRAC9 - 4.xx Series, iDRAC9 - 5.xx Series

Produit

iDRAC9

Dernière date de publication

03 août 2021

Version

3

Type d’article

Solution

Haut de la page