PowerProtect Data Manager Storage Replication Encryption has a status of "Off - Mismatch"

Résumé: PowerProtect Storage Replication Encryption has a status of "Off - Mismatch"

Cet article concerne Cet article ne concerne pas Cet article n’est associé à aucun produit spécifique. Toutes les versions du produit ne sont pas identifiées dans cet article.
Consulter d’autres ressources

Symptômes

After enabling "Replication Encryption" within PowerProtect Data Manager storage settings, the status of the storage replication encryption is set to Off-Mismatch.

Power Protect Data Manager storage settings showing Off mismatch status
 
 

Cause

In order for PowerProtect Data Manager Replication Encryption to work, File Replication DD Encryption must be enabled on Data Domain as well.

Résolution

To enable "File Replication DD Encryption", follow these steps:
 
  1. Launch PowerProtect DD System Manager.
  2. Expand Protocols, select DD Boost and make sure you are on the Settings tab.
  3. Scroll down to the bottom and expand Advanced Options. Check to see if "File Replication DD Encryption" is Disabled.
  4. If Disabled, scroll to the top of the window and select "More Tasks" dropdown and select "Set Options".
  5. Check the option for "File Replication DD Encryption" and select OK.
  6. Confirm under Advanced Options that "File Replication DD Encryption" is now set to Enabled.
  7. Open PowerProtect Data Manager, expand Infrastructure\Storage. Under Protection Storage tab, select your DD storage and select the "Discover" button.
  8. Once discovery is completed, the Replication Encryption should now show enabled.

Produits concernés

PowerProtect Software
Propriétés de l’article
Numéro d’article: 000207687
Type d’article: Solution
Dernière modification: 16 May 2026
Version:  4
Trouvez des réponses à vos questions auprès d’autres utilisateurs Dell
Services de support
Vérifiez si votre appareil est couvert par les services de support.