Dell Networking PowerSwitch OS9: Sådan aktiveres og administreres Link Layer Discovery Protocol

Riepilogo: Denne artikel beskriver, hvordan du aktiverer og administrerer LLDP (Link Layer Discovery Protocol) på Dell Networking-switche, der kører OS9.

Questo articolo si applica a Questo articolo non si applica a Questo articolo non è legato a un prodotto specifico. Non tutte le versioni del prodotto sono identificate in questo articolo.

Istruzioni

Målsætning

1. Vigtige punkter
2. Konfigurer LLDP
2. Se LLDP-konfiguration
4. Se oplysninger, der offentliggøres af tilstødende LLDP-agenter

 

Vigtige punkter

  • LLDP er som standard aktiveret på firmware version 9.2.0.2. Tidligere versioner af LLDP er som standard deaktiveret.
  • Dell Networking-systemer understøtter op til otte naboer pr. interface.
  • Dell Networking-systemer understøtter maksimalt 8.000 naboer pr. system. Hvis antallet af grænseflader multipliceret med otte overstiger maksimum, vil systemet ikke konfigurere mere end 8.000.
  • Konfigurationer på grænsefladeniveau tilsidesætter alle konfigurationsniveauer.

 

Konfigurere LLDP
 

Kommando

Formål

FTOS# configure

Gå til konfigurationstilstand.

FTOS(config)# protocol LLDP

Gå til LLDP-tilstand.

FTOS(config-lldp)# no disable

Disable deaktiverer LLDP globalt. No disable aktiverer LLDP globalt. Da protokollen blev indført som "disabled", vil det negative i denne sætning slå protokollen til.

FTOS(conf-if-te-0/10)#protocol lldp

Samme LLDP-tilstand findes på grænsefladeniveau. Alle specifikke LLDP-tilstandskommandoer på grænsefladeniveau tilsidesætter eventuelle globalt konfigurerede LLDP-parametre.

 

Se LLDP-konfiguration

 

Dell(conf)# protocol lldp

Dell(conf-lldp)# show config
!
protocol lldp
advertise dot1-tlv port-protocol-vlan-id port-vlan-id
advertise dot3-tlv max-frame-size
advertise management-tlv system-capabilities system-description hello 10
no disable

Dell(conf-lldp)# exit

Dell(conf)# interface gigabitethernet 1/31

Dell(conf-if-gi-1/31)# show config
!
interface GigabitEthernet 1/31
no ip address
switchport
no shutdown
Dell(conf-if-gi-1/31)# protocol lldp

Dell(conf-if-gi-1/31-lldp)# show config
!
protocol lldp

Se oplysninger, der offentliggøres af tilstødende LLDP-agenter
 

Vis kort information om tilstødende enheder.

show lldp neighbors

Vis alle de oplysninger, som naboer annoncerer.

show lldp neighbors detail

 

Eksempel på visning af kort information, der er annonceret af naboer

Dell(conf-if-te-0/3-lldp)# end

Dell (conf-if-te-0/3)# do show lldp neighbors

Loc      PortID      Rem Host Name        Rem Port Id                Rem Chassis Id
---------------------------------------------------------------------------------------------

Te 0/1                     -                     TenGigabitEthernet 0/5      00:01:e8:05:40:46
Te 0/2                     -                     TenGigabitEthernet 0/6      00:01:e8:05:40:46

 

Eksempel på visning af detaljer, der er annonceret af naboer

Dell# show lldp neighbors detail
========================================================================
Local Interface Te 0/4 has 1 neighbor
Total Frames Out: 6547
Total Frames In: 4136
Total Neighbor information Age outs: 0
Total Frames Discarded: 0
Total In Error Frames: 0
Total Unrecognized TLVs: 0
Total TLVs Discarded: 0
Next packet will be sent after 7 seconds
The neighbors are given below:
-----------------------------------------------------------------------

Remote Chassis ID Subtype: Mac address (4)
Remote Chassis ID: 00:01:e8:06:95:3e
Remote Port Subtype: Interface name (5)
Remote Port ID: TeGigabitEthernet 2/11
Local Port ID: TenGigabitEthernet 1/21
Locally assigned remote Neighbor Index: 4
Remote TTL: 120
Information valid for next 120 seconds
Time since last information change of this neighbor: 01:50:16
Remote MTU: 1554
Remote System Desc: Dell Networks Real Time Operating System Software
Dell Operating System Version: 1.0.
Dell Application Software Version: 9.4.0.0. Copyright (c) 1999-2014
Build Time: Thu Aug 9 01:05:51 PDT 1999-2014
Existing System Capabilities: Repeater Bridge Router
Enabled System Capabilities: Repeater Bridge Router
Remote Port Vlan ID: 1
Port and Protocol Vlan ID: 1, Capability: Supported, Status: Enabled

---------------------------------------------------------------------------

Prodotti interessati

PowerSwitch S3048-ON, PowerSwitch S4048-ON, PowerSwitch S4810P, PowerSwitch S4810-ON, PowerSwitch S4820T, PowerSwitch S5000, Force10 S60-44T, PowerSwitch S6000, PowerSwitch S6000 ON, PowerSwitch S4048T-ON, PowerSwitch S5048F-ON, PowerSwitch S6010-ON , PowerSwitch S6100-ON, PowerSwitch Z9100-ON ...
Proprietà dell'articolo
Numero articolo: 000120105
Tipo di articolo: How To
Ultima modifica: 31 dic 2025
Versione:  8
Trova risposta alle tue domande dagli altri utenti Dell
Support Services
Verifica che il dispositivo sia coperto dai Servizi di supporto.