Data Domain DD6400: DD6400への交換用ディスクの追加
Riepilogo: この記事は、DD6400モデルに交換用ディスクを追加する方法のリファレンスとして機能します。
Questo articolo si applica a
Questo articolo non si applica a
Questo articolo non è legato a un prodotto specifico.
Non tutte le versioni del prodotto sono identificate in questo articolo.
Istruzioni
交換用ディスクが不明な「U」を示すその他のData Domain製品は、「ディスク障害解除」でスペアにすることができます。DD6400などのストレージ プール製品は、「storage add」コマンドのみを受け入れて、新しいディスクをシステムに追加します。
図1: Data Domain CLI-Disk Show State、Disk Unfail
図1: Data Domain CLI-Disk Show State、Disk Unfail
- 以下は、交換用オペレーティング システム(1.1および1.2)またはデータ ディスクをDD6400に追加するためのCLIコマンドです。
- storage add force disk コマンドを実行して交換用ディスクをシステムに追加します。ディスクは交換用ディスクの番号です。
# storage add force disk 2.1 The 'storage add force' command will make the disk available to the filesystem. Any existing data on this will be lost. Are you sure? (yes|no) [no]: yes Checking storage requirements...done Adding disk 2.1 to the system...done Updating system information...done Disk 2.1 successfully added to the system
- 次のコマンドを使用して、Data Domainシステムがディスク ドライブを認識していることを確認します。コマンド表示では、 ディスク状態 はスペアまたは再構築である必要があります。
# disk show state Enclosure Disk 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 --------- ---------------------------------------------- 1 . . . . . . . . . . . . 2 v . . . . . . . . . . . . . . --------- ---------------------------------------------- Legend State Count ------ --------------- ----- . In Use Disks 26 v Available Disks 1 ------ --------------- ----- Total 27 disks Estimated total time remaining for reconstruction (minutes) 874
- DD6400キャッシュ階層(1.3および1.4)に交換用ディスクを追加するCLIコマンドを以下に示します。
- storage add disk 1. コマンドを実行して、ディスクをキャッシュ階層に追加します。ここで、は、ハードウェア障害アラート メッセージからのディスクの数です。
- filesys expand コマンドを実行して、新しいキャッシュ ディスクを使用中として設定します。
Prodotti interessati
DD6400 ApplianceProdotti
Data DomainProprietà dell'articolo
Numero articolo: 000214343
Tipo di articolo: How To
Ultima modifica: 18 mag 2026
Versione: 5
Trova risposta alle tue domande dagli altri utenti Dell
Support Services
Verifica che il dispositivo sia coperto dai Servizi di supporto.