Hopp til hovedinnhold
  • Legg inn bestillinger raskt og enkelt
  • Vis bestillinger og spor forsendelsesstatus
  • Opprett og få tilgang til en liste over produktene dine
  • Administrer Dell EMC-områder, produkter og kontakter for produktnivå ved hjelp av virksomhetsadministrering.

How to Use and Troubleshoot the Inspiron 3437

Sammendrag: This article provides information on using and troubleshooting your Inspiron 3437.

Det kan hende at denne artikkelen er oversatt automatisk. Hvis du har tilbakemeldinger angående kvaliteten, kan du gi oss beskjed ved hjelp av skjemaet nederst på denne siden.

Artikkelinnhold


Symptomer

Table of Contents:

  1. The Computer Fails to Start or There is No Video
  2. The Computer Stops Responding
  3. Microsoft Windows Crashes, Stops, Restarts or a Blue Screen Appears
  4. Dell PC Diagnostics Quick Test and SupportAssist for PCs and Tablets
  5. Troubleshooting a Notebook LCD Screen That is Black, Blank or Hard to See
  6. Inspiron 3437 Specifications
  7. Port Locations
  8. Resetting the System Setup (BIOS) to its Default Settings
  9. Wireless Networking How-to's and Troubleshooting
  10. How to Turn the Wireless Antenna On and Off on a Dell Computer
  11. Disabling or Enabling the Touchpad Using the Hot Key
  12. Mouse, Keyboard or Touchpad Not Working Correctly
  13. Computer Component is not Recognized
  14. Inspiron 3437 Drivers
  15. Dell Windows Support Center

This article provides information on using and troubleshooting your Inspiron 3437.

The Computer Fails to Start or There is No Video

If you experience a situation in which the computer does not start at all or if it does turn on (lights turn on and fans are spinning), but the computer does not show any image, listen for a series of beeps during start-up.

When beeping codes are heard, refer to (Table 1) to help troubleshoot the issue with your computer.

Repetitive Beep Codes
1 Possible motherboard failure - BIOS ROM checksum failure.
2 No RAM detected.
NOTE: If you installed or replaced the memory module, ensure that the memory module is seated properly.
3 Possible motherboard failure - Chipset error.
4 RAM read/write failure.
5 Real Time Clock failure.
6 Video card or chip failure.
7 Processor failure.
Table 1: Repetitive Beep Codes
 

When no beeping codes are heard, perform the following steps:

  1. Disconnect all external peripherals including the keyboard, mouse, and external monitor. Peripherals also include external storage devices such as flash drives, USB devices, printers, cards etc.
  2. Remove the A/C adapter from the computer and unplug the adapter from the A/C outlet.
  3. Remove the battery, for more information on how to remove the battery, browse to the Inspiron 3437 Online Manual Page, and click Owner's Manual.
    NOTE: You might be asked to provide the Service Tag of your computer, for more information on how to locate your Service Tag, refer to Dell Knowledge base article How to find the service tag on a Dell notebook computer.
  4. Press the Power button for 15 seconds.
  5. Make sure the connections on the power cord and A/C adapter are firmly pressed together.
  6. Insert the A/C into the computer and a good A/C outlet.
  7. Press the power button to see if the computer turns on and boots up ok, if not, refer to Dell Knowledge Base article Computer Does Not Turn on, or is Stuck on the Dell Logo Screen.
  8. Turn the computer off and insert the battery back into the computer.
  9. Press the power button to see if the computer turns on and boots up ok, if not, refer to Dell Knowledge Base article Check the Battery.
  10. Start attaching devices one at a time and testing to see if the computer will turn on.
Back to Top

The Computer Stops Responding

  1. Press the Power button for at least 15 seconds to make sure the computer turns off.
  2. Disconnect all external peripherals including the keyboard, mouse, and external monitor. Peripherals also include external storage devices such as flash drives, USB devices, printers, cards etc.
  3. Press the power button to see if the computer turns on and boots up ok, if not, refer to Dell Knowledge Base article Computer Does Not Turn on, or is Stuck on the Dell Logo Screen.
  4. Download and install SupportAssist. For more information on how to obtain and install SupportAssist, browse to the SupportAssist for PCs and tablets page.
  5. Perform system maintenance on your computer, for more information refer to Dell Knowledge Base article Optimization and Maintenance of Microsoft Windows.
  6. Start attaching devices one at a time and test to see if the computer stops responding.
Back to Top

Microsoft Windows Crashes, Stops, Restarts or a Blue Screen Appears

This link takes you to the Dell Knowledge Base article Microsoft Windows Crashes, Stops, Restarts or a Blue Screen Appears.

Back to Top

Dell PC Diagnostics Quick Test and SupportAssist for PCs and Tablets

  • The fastest and easiest way to identify and resolve the most common issues is by using our Dell PC Diagnostics quick test. This will either fix the problem automatically, or it will guide you through the steps to resolve the problem.
    NOTE: When the diagnostic identifies a failing part, depending on the failing part, we will immediately start the process for a free in-warranty replacement part.

  • SupportAssist, previously called My Dell, provides system updates, detects issues and sends you alerts based on your device, which makes solving and preventing problems easier than ever. This application gives you access to everything you need to take the guesswork out of maintaining PCs and tablets. For more information such as how to obtain and install SupportAssist, browse to the SupportAssist for PCs and tablets page.
  • When the computer cannot access the Internet, you can run the built-in diagnostics on your computer, for more information, refer to Dell Knowledge Base article, Run Built-In Diagnostics (ePSA) for Your System.
Back to Top

Troubleshooting a Notebook LCD Screen That is Black, Blank or Hard to See

For information on troubleshooting a notebook LCD Screen, refer to the Dell Knowledge Base article Troubleshooting a Notebook LCD Screen That is Black, Blank or Hard to See.

Back to Top

Inspiron 3437 Specifications

For information on the Inspiron 3437 Specifications, browse to the Inspiron 3437 Online Manual Page, click Specifications.

NOTE: You might be asked to provide the Service Tag of your computer, for more information on how to locate your Service Tag, refer to Dell Knowledge base article How to find the service tag on a Dell notebook computer.
Back to Top

Port Locations

For information on the port locations, browse to the Inspiron 3437 Online Manual Page, click Specifications.

NOTE: You might be asked to provide the Service Tag of your computer, for more information on how to locate your Service Tag, refer to Dell Knowledge base article How to find the service tag on a Dell notebook computer.
Back to Top

Resetting the System Setup (BIOS) to its Default Settings

Option 1:
  1. Reboot the computer.
  2. When prompted during POST, press the <F2> key to enter the setup screen.
  3. On the System Setup screen, press the <Right Arrow> key to move to the Exit menu.
  4. Press the <Down Arrow> key until Load Setup Defaults is highlighted, and press the <Enter> key.
  5. Press the <Enter> key on Yes to Restore Defaults and restart the computer.
Option 2:
  1. Reboot the computer.
  2. When prompted during POST, press the <F2> key to enter the setup screen.
  3. On the System Setup screen, press the <F9> key.
  4. Press the <Enter> key on Yes to Load Optimized Defaults and restart the computer.
Back to Top

Wireless Networking How-to's and Troubleshooting

For how-to's and troubleshooting information on wireless networking please visit the Dell Networking and Wireless Support Center.

Back to Top

How to Turn the Wireless Antenna On and Off on a Dell Computer

  1. Press and hold done the Fn key, then press the F2. Repeating this will toggle the wireless antenna off and on.
For more information on how to turn the wireless antenna on and off on a Dell Computer, refer to Dell Knowledge base article How to Turn the Wireless Antenna On and Off on a Dell Computer.
Back to Top

Disabling or Enabling the Touchpad Using the Hot Key

Keyboard Key Action
Disable Touchpad F3 Button Press and hold the Fn key then press the F3 key.
Table 2: Touchpad Hot Keys

For more information on how to turn the touch pad on or off, refer to Dell Knowledge base article Disabling or Enabling the Touchpad Using the Hot Key.

Back to Top

Mouse, Keyboard or Touchpad Not Working Correctly

Refer to the following Dell Knowledge Base articles for information on how to use or troubleshoot mouse, keyboard or touchpad issues.

Back to Top

Computer Component is not Recognized

SupportAssist, previously called My Dell, detects issues and sends you alerts based on your device, This application gives you access to everything you need to take the guesswork out of maintaining PCs and tablets. For more information on how to obtain and install SupportAssist, browse to the SupportAssist for PCs and tablets page.

Back to Top

Inspiron 3437 Drivers

For information on the Inspiron 3437 drivers available, browse to the Inspiron 3437 Driver Page.

NOTE: You might be asked to provide the Service Tag of your computer, for more information on how to locate your Service Tag, refer to Dell Knowledge base article How to find the service tag on a Dell notebook computer.

This article provides information on how to download drivers for the Inspiron 3437 computer, "How to Download and Install a Driver".

Back to Top

Dell Windows Support Center

This link takes you to the Dell Windows Support Center. Select the Operating System you need help with.

Back to Top


Årsak

Not Applicable

Oppløsning

Not Applicable

Artikkelegenskaper


Berørt produkt

Inspiron 3437

Dato for siste publisering

22 mar. 2024

Versjon

6

Artikkeltype

Solution