PowerStore: Data Path Alerts
Podsumowanie: This article discusses about Data Path alerts.
Ten artykuł dotyczy
Ten artykuł nie dotyczy
Ten artykuł nie jest powiązany z żadnym konkretnym produktem.
Nie wszystkie wersje produktu zostały zidentyfikowane w tym artykule.
Objawy
When Dell PowerStore encounters a problem, an error alert is generated to help identify the issue. This article explains the different possible causes and the relevant solutions for these error alerts. If your problem is not resolved despite the solution provided, check the technical support contact options.
Note: Cannot find the information you need? Let us know using the feedback form at the bottom of this article.
Note: Cannot find the information you need? Let us know using the feedback form at the bottom of this article.
Przyczyna
The cause is mentioned in the Resolution section under respective alerts.
Rozwiązanie
| Title | User Tier offline in PowerStore |
| Alert ID | DATA_PATH_USER_TIER_OFFLINE |
| Description | A PowerStore appliance only tolerates a single drive failure in the same RAID resiliency group within a certain time if RAID 5. If another drive in the same RAID resiliency group fails, while the RAID rebuilds following the first drive failure is still in progress, the second drive failure results in PowerStore Data Path going offline.  Note: For resolution of Alert ID DATA_PATH_LOG_DATA_TIER_OFFLINE(0x00200401), see KB PowerStore Alerts: Capacity Utilization. |
| Error Code | (0x00200301) |
| Resolution | Cause A second drive fault in the same RAID 5 resiliency group, while RAID rebuilds following the first drive fault is in progress. Solution Contact Technical Support for assistance.  Note: Avoid performing any changes to the system (do not touch the drives nor attempt recovery on your own) |
| Title | Appliance Read Only in PowerStore - V1.0 and recovery process |
| Alert ID | DATA_PATH_APPLIANCE_READ_ONLY_ENTER |
| Description | A PowerStore appliance detects corruption during the user data flush after attempt to inline recovery. The corruption limits the user data flush from making progress. User reads will be allowed, but writes will be disabled. Appliance transitions to Read-Only state. |
| Error Code | (0x00201301) |
| Resolution | Cause During user data flush of dirty pages from Log, if Mapper detects a metadata corruption after FUA attempt to recover data, the corruption limits the user data flush from progressing. User reads will be allowed, but writes will be disabled. PowerStore Data Path has to transition to a read-only state to reject any new incoming Write IOs. Solution Contact Technical Support for assistance. |
Produkty, których dotyczy problem
PowerStoreWłaściwości artykułu
Numer artykułu: 000130199
Typ artykułu: Solution
Ostatnia modyfikacja: 21 kwi 2024
Wersja: 6
Znajdź odpowiedzi na swoje pytania u innych użytkowników produktów Dell
Usługi pomocy technicznej
Sprawdź, czy Twoje urządzenie jest objęte usługą pomocy technicznej.