Przejdź do głównej zawartości
  • Szybkie i łatwe składanie zamówień
  • Wyświetlanie zamówień i śledzenie stanu wysyłki
  • Tworzenie i dostęp do listy produktów
  • Na firmowej stronie administracji możesz zarządzać witrynami, produktami i danymi kontaktowymi firmy Dell EMC.

Unsupported Cisco SFP+ Module causes network performance issues

Podsumowanie: This article addresses unsupported  Cisco SPF+ modules when used with Broadcom network interface cards.

Ten artykuł mógł zostać automatycznie przetłumaczony. Jeśli masz uwagi na temat jego jakości, przekaż je nam, korzystając z formularza u dołu tej strony.

Treść artykułu


Objawy

Event ID 34 will be posted in the System event log.

Log Name: System
Source: ebdrv
Date: 11/28/2013 10:51:15 AM
Event ID: 34
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: computername.domain.com
Description:
The description for Event ID 34 from source ebdrv cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
NTPNP_PCI0115
0
CISCO-OEM
SFP-H10GB-CU3M 

 

Przyczyna

The unsupported use of a Cisco SFP+ Module SFP-H10GB-CU3M on a Broadcom 57810 NetXtreme II 10 Gigabit NIC can cause network performance issues. Intermittent iSCSI disconnections may occur.

Rozwiązanie

Replace the SFP+ module with a supported module.

Właściwości artykułu


Produkt, którego dotyczy problem

Servers, Microsoft Windows 2008 Server R2, Microsoft Windows 2012 Server, Microsoft Windows 2012 Server R2

Data ostatniej publikacji

01 wrz 2022

Wersja

4

Typ artykułu

Solution