Pular para o conteúdo principal
Sair

Boas-vindas à Dell

Minha conta
  • Faça pedidos de forma rápida e simples
  • Visualize os pedidos e acompanhe o status de envio
  • Crie e acesse uma lista dos seus produtos
  • Gerencie seus sites, produtos e contatos de nível de produto da Dell EMC usando o Company Administration.
Login Crie sua conta Premier login Inscrição no programa de parceria
Fale Conosco

Seus carrinhos no Dell.com

Número do artigo: 000151899

No Boot Device Found When You Change the Boot Sequence to Legacy Mode

Resumo: This article addresses a "No boot device found" issue affecting certain XPS, Latitude, Precision, and OptiPlex when changing the Boot Sequence to Legacy mode in the BIOS setup menu.

Este artigo pode ter sido traduzido automaticamente. Se você tiver comentários sobre a qualidade dele, conte-nos usando o formulário na parte inferior da página.

Conteúdo do artigo

Sintomas

No Boot Device Found

XPS 12-9250, 12-7275, Latitude 3490, 3590, 7280, 7480, 5280, 5480, 5580, Precision 3520, OptiPlex 7760, 7460, 7060, 5260, 5060, 3060, 5060 AIO (and later systems) report "No boot device found" when you change the Boot Sequence to Legacy mode in BIOS setup menu.

SLN301692_en_US__1No-boot-device-found

These specific systems are based on the 7th generation Kaby lake processor (and above) and are designed to boot exclusively in the Unified Extensible Firmware Interface (UEFI) boot environment. As a result, if legacy boot mode is selected, the system will not boot.

Causa

Note: This situation applies to any system from the Kaby lake 7th generation processor forward and is not limited to the systems that this article was originally based on.
Note: Later systems may not include an option for Legacy Mode. Continue to troubleshoot the No Boot Device as this article only applies to systems that provide the Legacy Mode option.

Resolução

Return the BIOS to UEFI Boot

You can resolve this issue by returning the system to the UEFI boot mode.

  1. From a power off state, power the system on and press F2 to boot into the BIOS setup menu.
  2. Select "Boot sequence"
  3. Change the option from "Legacy" to "UEFI", then select "Apply" in the right lower corner.
    SLN301692_en_US__2UEFI-1
  4. Select "Advance Boot options" and disable "Enable Legacy Operation ROMs", then select "Apply" in the right lower corner.
    SLN301692_en_US__3UEFI-2
  5. Select "Secure Boot", then "Secure Boot Enable".
  6. Change the option from "Disabled to Enabled", then select "Apply" in the right lower corner.
    SLN301692_en_US__4UEFI-3
  7. Select "Exit" in the right lower corner and wait for the system to reboot.  

Mais informações

Additional Information

Recommended Articles

Here are some recommended articles related to this topic that might be of interest to you.

Out of Warranty support Out of warranty? No problem. Browse to the Dell.com/support website and enter your Dell Service Tag and view our offers.

NOTE: Offers are only available for US, Canada, UK, France, Germany, and China personal computer customers. Server and Storage not applicable.

Propriedades do artigo

Produto afetado
Latitude 5280/5288, Latitude 7280, Latitude 3490, Latitude 5480/5488, Latitude 7480, Latitude 3590, Latitude 5580, Latitude 7275, OptiPlex 3060 Tower, OptiPlex 3060 Micro, OptiPlex 3060 Small Form Factor, OptiPlex 5060 Tower, OptiPlex 5060 Micro , OptiPlex 5060 Small Form Factor, OptiPlex 5260 All-In-One, OptiPlex 7060 Tower, OptiPlex 7060 Micro, OptiPlex 7060 Small Form Factor, OptiPlex 7460 All-In-One, OptiPlex 7760 All-In-One, Precision 3520, XPS 12 9250 ...
Data da última publicação

21 nov. 2023

Versão

7

Tipo de artigo

Solution

Voltar ao início