Connectrix MDS: Misslyckad uppgradering på MDS 9706 eller 9710 med felet "bootflash busy; seg fault while mounting bootflash"

摘要: Användaren kan inte längre se "bootflash://sup-standby" efter uppgradering från NX-OS 6.2.19 till 8.1.1.

本文适用于 本文不适用于 本文并非针对某种特定的产品。 本文并非包含所有产品版本。

症状

Uppgradera från NX-OS 6.2.19 till 8.1.1.

Efter uppgraderingen kan användaren inte längre se "bootflash://sup-standby".

Se följande:
MDS1# dir bootflash:
bootflash:///
bootflash://module-5/
bootflash://sup-1/
bootflash://sup-active/
bootflash://sup-local/ 
En fungerande switch visar följande:
MDS2# dir bootflash:
bootflash:///
bootflash://module-6/
bootflash://sup-2/
bootflash://sup-local/
bootflash://sup-standby/
bootflash://module-5/
bootflash://sup-1/
bootflash://sup-active/
bootflash://sup-remote/    <---------------
Andra symptom på problemet kan vara följande:
  • ISSU/D misslyckas med följande felmeddelande:
Pre-upgrade check failed. Return code 0x4093007E (Issue cannot be done, bootflash is busy). 'segmentation fault' error messages when issuing `sys health check bootflash`:

switch# sys health check bootflash Unmount successful... Checking any file system errors...Please be patient... /isanboot/sbin/format-bootflash: line 75: 7598 Segmentation fault $SUDO $E2FSCK -n -v $@ > /dev/null 2> /dev/null done. 
Remounting bootflash .../isanboot/sbin/format-bootflash: line 62: 7600 Segmentation fault $SUDO /bin/mount $MNT_BOOTFLASH_DIR Failed to mount bootflash bootflash on the affected supervisor is not available switch# dir no such file or directory (invalid server) 
Logging log outputs: %BOOTVAR-2-AUTOCOPY_STANDBY_MOUNT_FAILED: Autocopy failed to access standby file system via NFS mount.Please, copy the boot images manually to standby bootflash. %SYSMGR-2-LAST_CORE_BASIC_TRACE: : PID 6688 with message non-sysmgr(non-sysmgr) crashed, core will be saved . Core file also generated: 
`show cores` Module  Instance  Process-name     PID       Date(Year-Month-Day Time) ------  --------  ---------------  --------  ------------------------- 5       1         non-sysmgr       6688      2017-10-08 07:29:07

原因

Problemet identifieras som följande från Cisco CSCvb93701:
ISSU/D fails on MDS 9706/9710 with 'bootflash busy' error; seg fault while mounting bootflash
CSCvb93701 (see also CSCvf99665)
Enligt det dokumenterade Cisco-problemet:
The system is only affected if it was previously running one of the following NX-OS releases: 6.2(17) - 6.2(19) 7.3(0)D1(1) - 7.3(1)D1(1) 7.3(0)DY(1) - 7.3(1)DY(1) This issue does not apply to any other NX-OS releases on MDS 9706 and 9710 platforms. It does not occur on the MDS 9718 platform.

解决方案

Workaround:
Det här problemet uppstår med det ogiltiga undernätet IPv6 i hanteringsgränssnittet.
switch13# show interface mgmt0
mgmt0 is up
    Hardware is GigabitEthernet
    Address is 2cab.ebfd.4386
    Internet address(es):
        10.8.96.223/23
        ::148.125.166.255/0      <--- "0" indicates an invalid subnet
        fe80::2eab:ebff:fefd:4386/64

Kontakta Dells tekniska support för hjälp med återställning.

受影响的产品

Connectrix MDS-9710

产品

Connectrix MDS-9706, Connectrix MDS-9710
文章属性
文章编号: 000052402
文章类型: Solution
上次修改时间: 21 9月 2023
版本:  4
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。